Honeywell HercuLine 10260S Installation, Operation And Maintenance Manual page 20

2. Specifications - Technical and Operating Specifications
Display Design
LED indicators
Display Operating
Temperature
Storage Temperature
Keys
See 4. Set Up and Calibration Procedures (page 28) for detailed information on display and keypad functions.
Modbus
Communications
Option
Connection
Maximum loop length
Communication Mode
Baud Rate
HART
Communications
10 10260S HercuLine® Actuator Installation, Operation and Maintenance Manual
Specifications – Local Display and Keypad
Display
Multi-segment LED displays that provide up to ten alphanumeric characters. Display
arrangement consists of two rows:
st
1 row (Upper display) – four characters
nd
2 row (Lower display) – six characters.
Six single LEDs provide actuator status and alarm indications.
–30 °C to +50 °C (–20 °F to +122 °F)
Automatically shuts off when operating temperature exceeds +50 °C
–40 °C to +93 °C (–40 °F to +200 °F)
Keypad
Six single pushbutton keys allow access to all status displays and set up group
parameters.
Specifications – Communications
Display
RS 485 Serial Communication, Modbus RTU Protocol
Twisted pair cable with shield
600 meters (2000 feet)
Half duplex
2400, 4800, 9600, 19.2K
HART 5 an HART 6
Revision 5
7/07