Table of Contents
Advertisement
This section provides you with the technical specifications and the model selection guide for the 10260S
Series Smart Actuators.
Technical and Operating Specifications
Weight
Enclosure
Gear Train
Mechanical Stops
Operating Temperature
Storage Temperature
Relative Humidity
Scale
Crank Arm
Output Shaft
Output Torque/Full
Travel Stroking Time
Rotation
Direction of Rotation
Manual Handwheel
Lubrication
Revision 5
10260S HercuLine® Actuator Installation, Operation and Maintenance Manual
7/07
2. Specifications
Table 1 Specifications - General
Physical
45 lb. (20.5 kg) net
Precision-machined Aluminum alloy casting, finished in light gray powder coat
epoxy.
Alloy steel, high efficiency steel spur gear primary train. Precision ground, self
locking/self releasing worm gear final mesh.
To prevent over-travel.
-30 °C to +75 °C (-20 °F to +170 °F)
-40 °C to +93 °C (-40°F to +200 °F)
0-99 % R.H. noncondensing, over the full operating temperature range.
0 to 100 % corresponding to full crank arm travel.
Adjustable radii (1 7/16" to a maximum of 5"). Position adjustable through 360°
rotation. Optional 12" crank arm adjustable 0 – 12" radii.
1" diameter, 1 1/2" long is standard on 10261S, 10262S, 10264S, 10266S, 10267S,
and 10268S.
1" diameter, 2" long is standard on 10263S, 10265S and 10269S optional on other
models.
Model #
Torque
10261S
10262S
10264S
10266S
10267S
10268S
10269S
10263S
10265S
90 degrees between 0 and 100% on scale, limited by mechanical stops.
Field programmable via local display and keypad.
Provides a means of positioning the actuator in the event of a power failure or set-up.
Texaco Starplex 2 EP Grease
2. Specifications - Technical and Operating Specifications
Lb-ft
N-M
10
15
20
27
40
55
60
80
40
55
80
110
150
200
200
270
300
400
Output Shaft Speed, sec/90
@60Hz
@50Hz
10
12
20
24
40
48
60
72
20
24
40
48
60
72
40
48
60
72
°
7
Advertisement
Table of Contents
Troubleshooting
