Honda HRM300 Manual page 293

dummyhead dummyhead
TROUBLESHOOTING
"Lifted" MESSAGE
Input the PIN code (page 3-16).
Abnormal
Can input by the ten digits keypad.
Cannot input
Can
input
Keypad trouble of the display
ECU.
Replace the display (page 10-3).
Forget the PIN code.
Connect the Dr.H and convey or re-set the PIN
code (see the Dr.H manual).
6-26
Normal
Recheck the warning message in the display.
Abnormal
The lift sensor plate is in the correct position.
Yes
Check for continuity between the main ECU
30P connector
connector
·30P connector
- 3P connector
·30P connector
- 3P connector
·30P connector
- 3P connector
·30P connector
- 3P connector
·30P connector
- 3P connector
·30P connector
- 3P connector
Normal
Main ECU trouble.
Replace the main ECU (page 10-7).
Normal
Temporary failure.
No
Install the main cover correctly or
replace the main cover (page 7-
5)
and lift sensor 3P
/ of main wire harness.
No.13 terminal (Green)
No.1 terminal (Green)
No.28 terminal (Red)
No.2 terminal (Red)
No.30 terminal (White)
No.3 terminal (White)
No.11 terminal (Green)
No.1 terminal (Green)
No.26 terminal (Red)
No.2 terminal (Red)
No.15 terminal (White)
No.3 terminal (White)
Abnormal
Replace or repair the main wire
harness.