Honda HRM 520 Owner's Manual

Honda HRM 520 Owner's Manual

Robotic lawnmower

Advertisement

EN
EN
Honda
Honda
Robotic
Robotic
Lawnmower
Lawnmower
HRM310/520
HRM310/520
Owner's Manual
Owner's Manual
Original Instructions
Original Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Honda HRM 520

  • Page 1 Owner’s Manual Owner’s Manual Original Instructions Original Instructions Honda Honda Robotic Robotic Lawnmower Lawnmower HRM310/520 HRM310/520...
  • Page 3 Congratulations on your selection of a Honda Robotic Lawnmower. We are confident that you will enjoy the benefit of your Honda Robotic Lawnmower as we take great pride in creating the finest quality lawn care products. We want to help you get the best results from your new robotic lawnmower and to operate it safely. This manual contains all the information on how to do that;...
  • Page 4: Table Of Contents

    CONTENTS Setting Safety Instructions Preparation Menu Settings - Component identification - Setting the work timer (M page 10) (M page 27) - Installation (M page 12) - Setting the lawnmower operation - Setting up the lawnmower (M page 31) (M page 15) - Checking the system (M page 43) - Viewing history (M page 46)
  • Page 5 1 OVERVIEW ........................4 How the Honda Robotic Lawnmower works ..4 Features............4 2 SAFETY INSTRUCTIONS ..................6 Precautions ..........6 Observe the following points for your safety ... 7 Label locations ..........9 3 PREPARATION .......................10 Component identification ......10 Installation........... Setting up the lawnmower ......15...
  • Page 6: Overview

    Features Mowing start points Operation timer Convenience You can designate the start points from which the Honda The Honda Robotic After configuring the Honda Robotic Lawnmower will start mowing. Mowing start Lawnmower has multiple...
  • Page 7 How the Honda Robotic Lawnmower works / Features Laying boundary wire The boundary wire location determines the parameters of the mowing area, this area may consist of multiple sections in which the lawnmower can operate. For mowing start point setup and detailed information please see “4 MENU SETTINGS” (M page 25).
  • Page 8: Safety Instructions

    Precautions SAFETY INSTRUCTIONS Precautions Carefully observe the following precautions. • Make sure to keep your hands, feet and any other body parts away from the rotating blades. • Do not touch sharp components such as the blades or blade disc other than when performing maintenance.
  • Page 9: Observe The Following Points For Your Safety

    Precautions / Observe the following points for your safety • Do not use automatic lawn watering systems while the lawnmower is operating, because the watering equipment may become damaged and the likelihood of water penetrating into the lawnmower is greatly increased.
  • Page 10 • Never attempt to tamper with the lawnmower. It can cause an accident as well as damage to the lawnmower. Disposal To protect the environment, do not dispose of this product, battery, etc. carelessly by leaving them in the waste. Observe the local laws and regulations or consult your authorised Honda dealer for disposal.
  • Page 11: Label Locations

    Honda Robotic Lawnmower. Failure to do so could result in personal injury or equipment damage. Keep all persons and pets away from the Honda Robotic Lawnmower area. Do not touch the rotating blade. Beware of sharp blades : blade in movement.
  • Page 12: Preparation

    Component identification PREPARATION Component identification Body Top view Bottom view Charging socket Height adjustment dial Front (caster) wheels (Ï2) Blade disc Manual STOP button Blades (Ï3) When you press the manual STOP button, the control panel cover pops up. Carrying area Rear (drive) wheels (Ï2) Control panel Docking station...
  • Page 13: Control Panel

    Component identification Control panel Up/down arrow buttons Display Press to navigate to the previous/ The home screen and menus next item in the display. can be seen here while the Back button lawnmower is turned on. Press to return to the previous menu in the display.
  • Page 14: Installation

    Installation We strongly recommend that an authorised Honda dealer performs the installation of your Robotic Lawnmower. Installation by an authorised Honda dealer will ensure that your system is working correctly. Checking conditions for installation Check with the dealer that performed the installation if the docking station and boundary wire are installed according to the conditions below.
  • Page 15 Installation Conditions for laying the boundary wire Image Condition Height of objects which the lawnmower might run on top of Lay boundary wire around objects which the lawnmower might run on top of (e.g. rocks, tree roots, etc.); these objects must be removed from the work area.
  • Page 16 Installation Image Condition More than 3 m More than 1 m Docking Boundary wire of station the another robotic lawnmower Boundary wire If you want to use an additional robotic lawnmower, the boundary wire must be laid More than 3 m according to the figure on the left.
  • Page 17: Setting Up The Lawnmower

    Setting up the lawnmower Setting up the lawnmower When turning the lawnmower on initially, the initial settings and setup wizard will appear. Through the initial settings, you can configure the display language, internal date and time, and create your PIN (Personal Identification Number). Through the setup wizard, you can configure the settings for the mowing operation of your lawnmower.
  • Page 18 Setting up the lawnmower Initial settings When turning the lawnmower on initially, the initial settings will appear to set the display language, internal date and time, and create your PIN (Personal Identification Number). N WARNING - Make sure to press the manual STOP button before performing the following procedure. Set 1 Select your preferred language and press the H button.
  • Page 19 Setting up the lawnmower Configuring the settings through the setup wizard The setup wizard will guide you to configure the settings for your mowing operation as follows: Configuring and testing the Menu name Usage settings [1.Garden layout] For configuring the settings related to - Direction for the lawnmower to dock to the layout of the boundary wire.
  • Page 20 Setting up the lawnmower Select [Clockwise(CW)] or [Anticlockwise(ACW)] G a r d e n la y o u t 1 / 7 referring to the layout of your docking station and Docking direction boundary wire, and press the H button. C lo c k w is e ( C W ) A n t i cl o c k w is e ( A C W ) N E X T...
  • Page 21 Setting up the lawnmower Setting the mowing start points Through this setting, you can set the starting point to operate the lawnmower. If you set the mowing start points and combine them with the settings of work timer, you can effectively mow your garden.
  • Page 22 Setting up the lawnmower Testing the Start points Through this testing, you can check the start points which you added in [2.Mowing start points]. NOTE: - Perform each test when the lawnmower is connected to the docking station. Select [3.Test start points] and press the S e t u p w iz a r d button to check the start points.
  • Page 23 Setting up the lawnmower Select [Yes] or [No] to the question of the test result Te s t s t a r t p o i n t s and press H button. If you select [Yes], go to step 3-7. Te s t r e t u r n h o m e If you select [No], the message “Do you want to modify the start point?“...
  • Page 24 Setting up the lawnmower Setting the work timer Through this setting, you can configure the work day and work time to operate the lawnmower. Select [4.Work timer] and press the H button to S e t u p w iz a r d configure the work day and work time.
  • Page 25 Setting up the lawnmower If you select [1.Auto fill up timer] in step 4-2, confirm the days which are automatically M O N configured referring to the boundary wire length T U E and garden size. W E D If you want to change the work time, select the day T H U and press the H button to change the work time of F R I...
  • Page 26 Setting up the lawnmower Select your region and press the H button. Wo r k t i m e r 7 / 7 S e l e c t y o u r r e g i o n . 1 .
  • Page 27: Usage

    Menu overview MENU SETTINGS The control panel menus are used to set how the lawnmower operates. Menu overview NOTE: - We recommend having your dealer change these settings during installation. Menu screen Selecting [Menu] in the home screen and press the H button, Menu screen is displayed as below: 1 7 : 0 1 Fr i M e nu...
  • Page 28 Menu overview Full menu diagram Menu : This indicates that the item can be set Work timer Work timer 1 From/To (Input value) MON/TUE/WED/THU/FRI/SAT/SUN through the Setup wizard. 2 From/To (Input value) Mowing start points MON/TUE/WED/THU/FRI/SAT/SUN Point 1/2/3/4/5 JAN/FEB/MAR/APR/MAY/JUN/ Seasonal timer Modify timer JUL/AUG/SEP/OCT/NOV/DEC (Input value)
  • Page 29: Setting The Work Timer

    Setting the work timer Setting the work timer You can set the work day and work time for the lawnmower to operate. You can also specify a specific area for each work time. Work timer You can select the day and time on which you want the lawnmower to operate.
  • Page 30: Mowing Start Points

    Setting the work timer Mowing start points You can set the mowing start points for each day of week. For example, if you set the following 5 start points in your garden, you enable the lawnmower to reach other areas through narrow passages and mow your garden effectively.
  • Page 31: Seasonal Timer

    Setting the work timer Seasonal timer The growth speed of lawn depends on the season. With this function, you can configure the ratio of the mowing time for each season. Menu screen Home screen [1.Work timer] [3.Seasonal timer] [1.Modify timer] Enter a percentage of each month using the number buttons.
  • Page 32: Quiet Timer

    Setting the work timer Quiet timer You can set the blade speed, wheel speed and timer for operating the lawnmower quietly. Menu screen Home screen [1.Work timer] [4.Quiet timer] (“ON” is checked) Select [Blade speed] and press the H button. Configure this setting to operate the lawnmower with If you want the lawnmower to mow on your low noise during the period which you configure.
  • Page 33: Setting The Lawnmower Operation

    Setting the lawnmower operation Setting the lawnmower operation Auto mode You can set up the lawnmower operation as follows: Setting the angle to turn from the boundary wire Setting the distance to the start point When leaving the boundary wire, set the angle to turn Until the lawnmower reaches a set starting point from the boundary wire.
  • Page 34 Setting the lawnmower operation Distance from the boundary wire when the lawnmower goes toward the mowing start points: The lawnmower moves between the boundary wire and the specified value at random as it goes toward the mowing start point. Narrow passage Low value Low value High value...
  • Page 35 Setting the lawnmower operation Mowing start points Menu screen Home screen [2.Garden setup] [1.Auto mode] [1.Mowing start points] [1.Point 1] to [5.Point 5] Select (Clockwise) or (Anticlockwise), enter the values of the The lawnmower travels to this location along the distance from the docking station to start boundary wire, and then turns away from the cutting, and enter a percentage of the...
  • Page 36 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [2.Mowing pattern] [1.Point 1] to [5.Point 5] You can select from 3 mowing patterns below: [Directional] With the [Directional] setting, when the lawnmower detects the boundary wire, it turns at a narrow angle. This is used for mowing narrow areas.
  • Page 37 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [3.Advanced setting] [2.Edge cutting] With this function, you can mow the unmown area along the boundary wire. If the edge cutting setting is enabled, the lawnmower goes around your garden along the boundary wire to mow the edge before starting the usual mowing.
  • Page 38 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [3.Advanced setting] [3.Spiral cutting] With this function, the lawnmower can be focused on mowing the area where the lawn is not completely mown, or the growth speed of the lawn is fast. The lawnmower detects the dense area and mow there spirally.
  • Page 39 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [3.Advanced setting] [4.Narrow passage] If there are narrow passages on your garden, you can configure the settings of the narrow passages to let the lawnmower pass through them toward the starting point. End of the narrow passage Start of the narrow passage A : Distance...
  • Page 40: Manual Mode

    Setting the lawnmower operation Manual mode With this function, you can configure the lawnmower to mow without the work timer function. NOTE: - If you want to operate the lawnmower with [Manual mode], see “Operating the lawnmower with the Manual mode” (M page 72) Mowing pattern You can select from 3 mowing patterns below: [Directional]...
  • Page 41: Usage

    Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [2.Manual mode] Select [Mowing pattern] and press the H button. You can adjust how the lawnmower moves while mowing. Select [Random], [Directional] or [Mixed] for configuring the mowing pattern, and NOTE: press the H button.
  • Page 42: Garden Layout

    Setting the lawnmower operation 1 7: 0 1 F r i M a nu a l m o de se t up Edg e c ut t i n g Set the edge cutting and OF F select the days on which Se le ct day s you want the lawnmower to M O N...
  • Page 43: Homing Setup

    Setting the lawnmower operation Homing setup Menu screen Home screen [2.Garden setup] [4.Homing setup] [1.Passage width] Enter a number setting. You can set where the lawnmower moves in relation to the boundary wire as it goes back to the docking Press the H button.
  • Page 44 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [4.Homing setup] [2.Capacity for homing] Select [Auto] or Enter a percentage of battery residual capacity. You can set the percentage of remaining amount of The range of the percentage of battery the battery when the lawnmower starts to go back to residual capacity is 10 –...
  • Page 45: Checking The System

    Checking the system Checking the system Check signal You can check if the boundary wire signal is correctly reaching the lawnmower and confirm how strong the signal is. Menu screen Home screen [3.Diagnostics] [1.Check signal] Signal level indication Signal strength No loop signal Weak Moderate...
  • Page 46: Test Start Points

    Checking the system Test start points You can check whether the lawnmower can correctly return to the docking station, and whether it can reach each start points according to settings. Menu screen Home screen [3.Diagnostics] [2.Test start points] [1.Point1] to [5.Point5] Select a point from 1 to 5 which you want to test and press the H button.
  • Page 47 Checking the system Menu screen Home screen [3.Diagonostics] [2.Test start points] [0.Home] Select [Clockwise(CW)] or [Anticlockwise(ACW)]. You can test if the lawnmower will correctly return to the docking station. Press the H button. NOTE: - Perform this test when the lawnmower is not connected to the docking station.
  • Page 48: Viewing History (M

    Viewing history Viewing history Operation history You can check the cumulative time that the lawnmower has operated and recharged. Menu screen Home screen [4.History] [1.Operating history] [1.Operating time] Check the history. You can view how long the lawnmower has mowed, and how long the lawnmower has charged.
  • Page 49: Work History

    Viewing history Work history Menu screen Home screen [4.History] [1.Operating history] [2.Work history] Check the history by pressing the up/ down arrow buttons to scroll the menu. You can view the lawnmower’s cutting history (when the lawnmower was mowing), return history (when Press the G button to return to the the lawnmower was returning to the docking station), previous screen.
  • Page 50: Fault History

    Viewing history Fault history You can view the lawnmower’s fault history (when a fault occurred). Menu screen Home screen [4.History] [2.Fault history] Select fault history entry by using the up/ down arrow buttons. The history of errors that have occurred are logged. NOTE: Press the H button.
  • Page 51: Setting The System (M

    Setting the system Setting the system Language You can set the menus of the display to your preferred language. Menu screen Home screen [5.System settings] [1.Language] Select your preferred language. Select the language shown in the display from among 5 languages. Press the H button.
  • Page 52: Date And Time

    Setting the system Menu screen Home screen [5.System settings] [2.Display/Sound] [Keypad] Select [ON] or [OFF] by pressing the up/ down arrow buttons. You can set whether or not a beep sound is emitted when you press control panel buttons. Press the H button. Press the G button to return to the previous screen.
  • Page 53: Security

    Setting the system Security Security settings are used to prevent the lawnmower from being operated by other people. Menu screen Home screen [5.System settings] [4.Security] [1.Alarm] NOTE: - Before selecting [1.Alarm], you will need to input your PIN. Select [ON]. This setting enables or disables the alarm.
  • Page 54: Factory Reset

    Setting the system Factory reset You can reset all settings to the factory defaults. Menu screen Home screen [5.System settings] [5.Factory reset] Input your PIN and press the H button. Execute this command to revert all settings to their factory defaults. Select [Yes].
  • Page 55: Usage

    Checking the mowing area / Connecting to a power source USAGE Checking the mowing area Before operating the lawnmower, ensure the mowing area is free of pets and foreign objects. Turn off the lawnmower before removing any foreign objects. CAUTION: - If there are any holes (such as rabbit holes, etc.) in the work area, fill them in so that the work area is level.
  • Page 56: Checking The Lawnmower

    Checking the lawnmower / Turning on / off the power Connect the transformer plug to a power outlet with the designated voltage. Power outlet voltage for the EAE, EAEN and EAS types: AC 230 V Power outlet voltage for the EAB type: AC 240 V Checking the lawnmower Before operation, check to make sure that it is connected all the way into the docking station.
  • Page 57: Operating The Lawnmower In The Auto Mode

    Turning on / off the power / Operating the lawnmower in Auto mode Turning off the power Press the manual STOP button. The control panel cover pops up. Press the B (Off) button on the control panel. NOTE: - When you turn off the lawnmower, it will not begin to operate even if you set the timer. Operating the lawnmower in Auto mode Entering your PIN (Personal Identification Number) When turning the lawnmower on, you must enter the PIN.
  • Page 58: Operation

    Operating the lawnmower in Auto mode Auto mode operation These instructions can be used to operate the lawnmower at the time scheduled for the Auto mode settings. NOTE: - For details on settings, see “4 MENU SETTINGS” (M page 25). N WARNING - Make sure to press the manual STOP button before performing the following procedure.
  • Page 59: Adjusting The Height Of The Blades

    Adjusting the height of the blades Adjusting the height of the blades The height of the blades determines how tall or short the grass will be cut. Test the lawnmower on a small area and adjust blade height according to your preference. N WARNING - Make sure to press the manual STOP button before performing the following procedure.
  • Page 60: Weekly Checks (M

    Adjusting the height of the blades / Weekly checks Close the height adjustment dial cover, and close the control panel cover. Repeat the steps above if you need to make additional adjustments. Weekly checks Check the lawnmower and docking station once a week to remove dirt and grass. Also check if the blades and blade disc have been damaged, and verify that there are no other problems.
  • Page 61: Carrying The Lawnmower

    Carrying the lawnmower Carrying the lawnmower When carrying the lawnmower, observe the following points. N WARNING - Do not carry the lawnmower with the blades pointed toward you. - Take care to avoid dropping the lawnmower when carrying it. - Make sure to press the manual STOP button and turn the lawnmower off before performing the following procedure.
  • Page 62: Troubleshooting

    Before contacting your dealer / Messages TROUBLESHOOTING Before contacting your dealer In the unlikely event that you are facing a problem and you need to contact your dealer, ensure that you have the following information available. • Owner’s Manual • Consider any recent work in your garden. •...
  • Page 63 Messages / Resolving problems Message Cause Solution Outside loop The lawnmower exited the boundary Move the lawnmower into the work area. wire. Check the power supply of the docking station. Check if the boundary wire connectors are correctly connected. If the message does not disappear, check if the boundary wire connectors are correctly connected, and check if there are no similar lawnmowers in the area.
  • Page 64: Resolving Problems

    Messages / Resolving problems Resolving problems Unless having the power on is necessary to check something, turn off the power when checking the condition of the lawnmower or the blade. Problem Solution The lawnmower cannot be Check the connections, and charge the lawnmower again. charged.
  • Page 65: Maintenance

    The required service intervals and the kind of maintenance to be performed are described in the following chart. Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will be able to perform a variety of checks and software updates that cannot be completed by the owner.
  • Page 66 Maintenance procedures Preparing Perform the following procedures in an area not subject to rainfall. Correct Incorrect 90 degrees More than 90 • Put on a pair of work gloves. or less degrees • When checking the blades, turn the lawnmower on its side. •...
  • Page 67 Maintenance procedures Cleaning the docking station N WARNING - Unplug the transformer’s plug from the power outlet (House) before cleaning it. Clean dirt and grass off of the docking station using a brush. Brush off dirt and grass from docking station, particularly around parts on which the lawnmower rests and around the charging plug area: Charging plug Checking...
  • Page 68 Maintenance procedures Checking the docking station Check the docking station for problems. Check item(s) Action Damage to the docking Visually inspect the docking station. Docking station station If it is damaged, consult your dealer. Loosened connectors of the Visually inspect the connectors. Connectors docking station If they are loose, consult your dealer.
  • Page 69 Maintenance procedures Checking the docking station screws Check item(s) Action Visually inspect the screws. Loosened screws of the Docking station If they are loose, tighten them with a flat-blade docking station screwdriver. Screw...
  • Page 70 Maintenance procedures Checking the blades and blade disc Check the condition of the blades and blade disc as follows. Life time of the blades In order to have good cutting performance, maintain the sharp cutting edge on the blades. Typically, the life time of the blades is 160 hours.(2 weeks to 2 months) Because the life time depends on grass condition, it may be necessary to exchange earlier than usual, especially in the spring season.
  • Page 71: Replacing The Blades

    Maintenance procedures Replacing the blades To replace the blades, perform the procedures below. N WARNING - Put on a pair of work gloves before performing the following procedures. - Do not touch the blade while it is spinning. You may be injured if you do so. NOTE: - This work requires technical skill and knowledge, as well as special tools.
  • Page 72: Storage

    (e.g. electrical junction box) to ensure they do not corrode over the winter period. Honda recommends that all electrical components such as the transformer should be stored in a dry, frost free environment that is not exposed to the winter weather.
  • Page 73: Technical Information

    Specifications TECHNICAL INFORMATION Specifications Model HRM310 HRM520 Description code MBEF MBDF Type EAEN EAEN Length 645 mm Width 550 mm Height 275 mm Weight 11.6 kg 11.9 kg Electrical system Li-ion Li-ion Battery 22.2 V / 1800 mAh 22.2 V / 3600 mAh Input AC 230 V AC 230 V AC 240 V AC 230 V AC 230 V AC 230 V AC 240 V AC 230 V Transformer...
  • Page 74: Appendix

    Manual mode operation APPENDIX Operating the lawnmower with the Manual mode This setting can be used when 2 or more areas within the boundary wire are connected by a narrow path. If you have 2 or more areas within the boundary wire connected by a path that is less than 1 meter wide, the lawnmower cannot pass between them, and must be carried to the other area manually.
  • Page 75 Manual mode operation Press the H button. Press the G button to return to the Home screen. Close the control panel cover. The lawnmower automatically begins to operate. NOTE: - The lawnmower does not turn off automatically when in manual mode. Canceling the Manual mode operation You can cancel the operation which you selected on the Manual mode screen and the lawnmower returns to the docking station.
  • Page 76 Manual mode operation Press the H button. The power turns on, and the startup screen on the control panel is displayed. Press the G button to return to the Home screen. Close the control panel cover. The lawnmower returns to the docking station.
  • Page 77: Major Honda Distributor Addresses

    BALTIC STATES AUSTRIA BELGIUM BULGARIA CROATIA (Estonia/Latvia/Lithuania) Honda Austria Branch of Honda Motor Europe Ltd Eesti filiaal Honda Motor Europe Ltd Belgian Branch Kirov Ltd. Hongoldonia d.o.o. Honda Motor Europe Ltd Meistri 12 13517 Tallinn Estonia Doornveld 180-184 1731 Zellik...
  • Page 78: Ec Declaration Of Conformity" Content Outline

    Commercial name d) Type e) Serial number Manufacturer and able to compile the technical documentation: Honda France Manufacturing S.A.S. Pôle 45 - Rue des Chataîgniers 45140 ORMES - FRANCE References to harmonized standards Other standards or specifications...
  • Page 79 “EC Declaration of Conformity” CONTENT OUTLINE Português ( Portuguese ) Polski ( Polish ) Suomi / Suomen kieli (Finnish) Declaração CE de Conformidade Deklaracja Zgodności WE EY-VAATIMUSTENMUKAISUUSVAKUUTUS 1. O abaixo assinado, *2, representante do fabricante, 1. Niżej podpisany *2, reprezentujący 1.
  • Page 80: Lcd Menu Index

    LCD MENU INDEX Menu name Step Page Alarm System settings → Security P.51 Auto mode Garden setup → Auto mode P.31 BG color System settings → Display/Sound P.49 Check signal Diagnostics P.43 Contrast System settings → Display/Sound P.49 Create a PIN System settings →...
  • Page 81: Lawn Diagram

    LAWN DIAGRAM...
  • Page 82: Dealer Checksheet

    DEALER CHECKSHEET The following information is provided by your dealer after setup is complete. Basic setting information (M pages 16, 51) PIN (Personal Identification Number): Language : English / Deutsch / Français / Italiano / Nederlands / Svenska / Norsk / Español / Polski / Dansk / Suomalainen / Čeština / Português Setup wizard setting information (M page 17) The following items are related to the basic settings for Setup wizard.
  • Page 83 Other setting item information Please fill the following items if configuring them with the Menu settings. Garden layout setting information (M pages 33, 37, 40, 41) Passage width: Home screen [2.Garden setup] [1.Auto mode] [1.Mowing start points] [1.Point 1] to [5.Point 5] Point 1: Point 2: Point 3:...
  • Page 84: Quick Guide

    QUICK GUIDE Fundamentals Turning on / off the power Sending back home Adjusting the cutting height (M page 11, 54) (M page 11) (M page 57) Decrease Increase Stopping the lawnmower (M page 10) Blade height Position Approximate blade height 20 mm 30 mm 40 mm...
  • Page 85 Technical tips Mowing mode You can select from 2 modes of operation (available in “Menu Settings”). Auto mode (M page 31) The lawnmower automatically mows according to inputted time and garden settings. Manual mode (M page 38) Start mowing anytime without timer settings. Cleaning the lawnmower (M page 64) NOTE: Clean dirt and grass off of the lawnmower using a brush...
  • Page 88 HRM310K1 HRM310K1 HRM520K1 HRM520K1 32VP7621 32VP7621 xxxx.xxxx.xx xxxx.xxxx.xx xxxx.xxxx.xx xxxx.xxxx.xx 00X32-VP7-6210 00X32-VP7-6210 Honda Motor Co., Ltd. 2015 Honda Motor Co., Ltd. 2015...

This manual is also suitable for:

Hrm 310

Table of Contents