dummyhead
dummyhead
INSTALLATION
4-3-2-4 Rollover Sensor
Test
4
Test Mower
4-3
Sensors
4-3-2
4-3-2-4
Rollover Sensor
3-40
Test
1.Check Area Wire
2.Test Setup
3.Test Mower
4.Calibrate Sensor
5.Area
Enter Key
Test
Test Mower
1.Manual Stop
2.Sensors
3.Alarm
4.Display
5.Keypad
Enter Key
Test
Test Mower
1.Lift Sensor
2.Tilt Sensor
3.Obstruction Sensor
4.Rollover Sensor
Enter Key
Test
Test Mower
Rollover Sensor
1st Turn Over the Mower
2nd Return Upright
Sensor
Angle Detection
Enter Key
Test
Test Mower
Rollover Sensor
Result
Sensor
Angle Detection
• To perform this test, mower should be
placed on a level surface.
–
–
• Tilt the mower by hand and check value
displayed matches actual angle, and
sensor value turns to "OK".
OK
55°