Honda HRM300 Manual page 206

dummyhead dummyhead
2-1 Timer
Quick Setup
2
Timer
2-1
Mon-Tue-Wed-Thu-Fri-Sat-Sun
Start Time & End Time 1
Start Time & End Time 2
Quick Setup
1.Timer
2.Zone
3.Summary
4.Reset
Enter Key
Quick Setup
Timer
0.OK 9.Select All
1.Monday
2.Tuesday
3.Wednesday
4.Thursday
Select Button
Quick Setup
Timer
0.OK 9.Select All
5.Friday
6.Saturday
7.Sunday
Select [0.OK]
Quick Setup
Timer
Start End
Timer 1 __:__- __:__
Timer 2 00:00-00:00
Enter Key
Activated
How to determine weekly working time*.
*Working Time=Cutting Time + Return Time +
Charging Time
1. Two gardens, with same lawn area, will
have a different weekly working time
depending on following criteria.
• Field geographical position (north, east,
west or south of Europe)
• Field condition
-Type of grass
-Boundary wire layout (Zones, Length,
Shortcut Wire(s))
□
-Slopes
□
2. Below table provides a rough estimation of
□
weekly working time. Given value should be
□
adjusted (+50% to -50%) depending on the
above listed criteria.
□
□
□
(-) HRM300 is not designed for large areas as
battery life would decrease very quickly.
3. It is advisable to visit the customer 1 or 2
months after installation to confirm that the
timer settings are well defined.
• Too long working time: grass will look
trampled.
• Too short working time: some small
areas will remain uncut.
INSTALLATION
3-21