Page 1
Honda Robotic Lawnmower HRM3000 Owner’s Manual Original Instructions Service & Support Please refer to "5.Mii-monitor Preparation" how to install the Mii-monitor and setting of Bluetooth ® https://www.hondappsv.com/HME/...
Page 3
Congratulations on your selection of a Honda Robotic Lawnmower. We are confident that you will enjoy the benefit of your Honda Robotic Lawnmower as we take great pride in creating the finest quality lawn care products. We want to help you get the best results from your new robotic lawnmower and to operate it safely. This manual contains all the information on how to do that;...
CONTENTS Setting Safety Instructions Preparation Menu Settings - Component identification - Setting the work timer (M page 10) (M page 34) - Installation (M page 12) - Setting the lawnmower operation - Setting up the lawnmower (M page 38) (M page 17) - Checking the system (M page 52) - Viewing history (M page 55)
Page 5
1 OVERVIEW ........................4 How the Honda Robotic Lawnmower works ..4 2 SAFETY INSTRUCTIONS ..................6 Precautions ..........6 Observe the following points for your safety ... 7 Label locations ..........9 3 PREPARATION .......................10 Component identification ......10 Installation........... Setting up the lawnmower ......17 4 MENU SETTINGS ....................32...
How the Honda Robotic Lawnmower works OVERVIEW How the Honda Robotic Lawnmower works The mowing area is determined by the boundary wire that emits a signal; when the lawnmower detects the boundary it turns and it cuts the grass randomly. When battery starts running out, it goes back to the docking station.
Page 7
How the Honda Robotic Lawnmower works Laying boundary wire The boundary wire location determines the parameters of the mowing area, this area may consist of multiple sections in which the lawnmower can operate. For mowing start point setup and detailed information please see “4 MENU SETTINGS” (M page 32).
Precautions SAFETY INSTRUCTIONS Precautions Carefully observe the following precautions. • Make sure to keep your hands, feet and any other body parts away from the rotating blades. • Do not touch sharp components such as the blades or blade disc other than when performing maintenance.
Precautions / Observe the following points for your safety Observe the following points for your safety • When carrying the lawnmower, turn it off and carry it as explained in this manual (see page 73) with the blades facing away from you. •...
Page 10
• Never attempt to tamper with the lawnmower. It can cause an accident as well as damage to the lawnmower. Disposal To protect the environment, do not dispose of this product, battery, etc. carelessly by leaving them in the waste. Observe the local laws and regulations or consult your authorised Honda dealer for disposal.
You are also asked to carefully read the safety regulations in the applicable chapter of this handbook. The Honda Robotic Lawnmower is designed to give safe and dependable service if operated according to ®...
Component identification PREPARATION Component identification Body Top view Bottom view Charging socket Front (caster) wheels (Ï2) Manual STOP button When you press the Blade disc manual STOP button, the control panel cover pops up. Blades (Ï3) Carrying area Control panel Rear (drive) wheels (Ï2) Docking station The lawnmower recharges at the docking LED indicator...
Page 13
Component identification Control panel Up/down buttons Display Press to navigate to the previous/ The home screen and menus next item in the display. can be seen here while the Back button lawnmower is turned on. Press to return to the previous menu in the display.
Installation Installation We recommend that an authorised Honda dealer performs the installation of your Robotic Lawnmower. Checking conditions for installation Check with the dealer that performed the installation if the docking station and boundary wire are installed according to the conditions below. Also periodically confirm that these conditions are still met.
Page 15
Installation Image Condition Example of correct installation Pattern 1 Pattern 1: Standard installation Connect the docking station perpendicular to the wire. within 30 cm 0 cm or more Pattern 2 / Pattern 3 Pattern 2: Clockwise installation Connect the docking station parallel to the wire 5 cm or less 5 cm or less (in the clockwise direction).
Page 16
Installation Conditions for laying the boundary wire Image Condition Height of objects which the lawnmower might run on top of Lay boundary wire around objects which the lawnmower might run on top of (e.g. rocks, tree roots, etc.); these objects must be removed from the work area.
Page 17
Installation Image Condition More than 3 m More than 1 m Boundary wire of Docking the another robotic station lawnmower Boundary wire If you want to use an additional robotic lawnmower, the boundary wire must be laid according to the figure on the left. More than 3 m Boundary wire of More than 1 m...
Page 18
Installation Installing boundary wire and connecting to the docking station Image Operation Set the boundary wire by using the “LAWN Boundary wire DIAGRAM” (M page 100). • Leave enough wire to ensure that small adjustments can be made, double backing outside of the loop is acceptable.
Setting up the lawnmower Setting up the lawnmower When turning the lawnmower on initially, the initial settings will appear. Through the initial settings, you can configure the display language, internal date and time, and create your PIN (Personal Identification Number). Once initial settings are done, you can configure the settings for the mowing operation of your lawnmower using the setup wizard.
Page 20
Setting up the lawnmower Initial settings When turning the lawnmower on initially, the initial settings will appear to set the display language, internal date and time, and create your PIN (Personal Identification Number). Initial settings are performed on the control panel. After initial settings, you can use Mii-monitor to change the settings.
Setting up the lawnmower Configuring the settings through the setup wizard This section explains the setup wizard procedure using the control panel on the lawnmower. The setup wizard will guide you to configure the settings for your mowing operation as follows: Configuring and testing the Menu name Usage settings [1.
Page 22
Setting up the lawnmower Setting the cutting height Through this setting, you can set the height of the lawnmower blades. Select [1.Setup wizard] and press the Sel ect ins tal l m enu button. 1.Setup wi z ard Setup wizard top screen is displayed. 2.Adv anced s etup 3.Res tar t i ni ti al set up Fi ni s h Select [1.Cutting height] and press the H button.
Page 23
Setting up the lawnmower Set the “Start cutting height” with the buttons Cutti ng hei ght or number buttons and press the H button. Start height 60( m ax ) NOTE: - We recommend that your lawn is cut to a height of less than 65mm before using Miimo.
Page 24
Setting up the lawnmower Setting the garden layout Through this setting, you can configure the information of your garden layout for operating the lawnmower. [2.Garden layout] is selected. Press the H button to Setup wi z ard configure the garden layout. Garden layout screen is displayed. 1.C utti ng hei ght 2.G arden lay out 3.M owi ng s tar t poi nts...
Page 25
Setting up the lawnmower Setting the mowing start points Through this setting, you can set the starting point to operate the lawnmower. If you set the mowing start points and combine them with the settings of work timer, you can effectively mow your garden.
Page 26
Setting up the lawnmower Testing the Start points Through this testing, you can check the start points which you added in [3.Mowing start points]. NOTE: - Perform each test when the lawnmower is connected to the docking station. Select [4.Test start points] and press the Setup wi z ard button to check the start points.
Page 27
Setting up the lawnmower Test the return home of the lawnmower to the Test star t poi nts docking station. Point Select [0 Home]. Hom e NEXT Select [Clockwise (CW)] or [Anticlockwise (ACW)] Test retur n hom e and press H button. Sel ect dir ec ti on to hom e Cl oc k wi se ( CW ) Anti cl oc k wi se ( ACW)
Page 28
Setting up the lawnmower Setting the work timer With this setting, you can configure the work day and work time at which the lawnmower operates in auto mode. Select [5.Work timer] and press the H button to Setup wi z ard configure the work day and work time.
Page 29
Setting up the lawnmower Confirm the days which are automatically selected Work ti m er referring to the boundary wire length and garden size. Select [NEXT] and press the H button to M i nim um day s req uir ed proceed to the timer setting screen. Al l M O N T UE NOTE: T HU...
Page 30
Setting up the lawnmower Confirm the achieved and recommended hours per Wor k ti m er week. Select [NEXT] or [No] and press the H button. If you select [NEXT], go to step 5-12. Achi ev ed If you select [No], go to step 5-5. 10hr s/ week Rec om mended 10hrs /week NEXT...
Page 31
Setting up the lawnmower Confirm each month’s ratio, select [NEXT]. Seasonal t im er 0 0 % J UL 1 0 0 % NOTE: FEB 0 0 0 % AUG 1 0 0 % MAR 0 4 0 % SEP 0 8 0 % - You can modify the values for operating the APR 0 6 0 % OC T 0 4 0 % lawnmower.
Page 32
Setting up the lawnmower Configuring the settings through the advanced setup The advanced setup will guide you to configure the settings for your mowing operation as follows: Menu name Settings [1. Mowing settings] - Mowing pattern - Wire overlap - Edge cutting - Spiral cutting [2. Quiet timer] - Blade speed - Wheel speed - Timer...
Page 33
Setting up the lawnmower Select [ON] or [OFF] and press the H button. M owi ng s etti ngs If you select [ON], go to step 1-6. Edge c utti ng If you select [OFF], go to step 1-8. O FF N EXT Select [CW], [ACW], or [Mixed] for the edge cutting M owi ng s etti ngs...
Menu overview MENU SETTINGS The control panel menus are used to set how the lawnmower operates. The menu settings can also be accessed in Mii-monitor. You can use Mii-monitor to save the settings. You can also restore saved settings. Menu overview NOTE: - We recommend having your dealer change these settings during installation.
Page 35
Menu overview Full menu diagram Menu Work timer Work timer : This indicates that the item can be set 1 From/To (Input value) MON/TUE/WED/THU/FRI/SAT/SUN through the Setup wizard. 2 From/To (Input value) Mowing start points MON/TUE/WED/THU/FRI/SAT/SUN Point 1/2/3/4/5 Seasonal timer Auto setup JAN/FEB/MAR/APR/MAY/JUN/JUL/AUG/SEP/OCT/NOV/DEC (Input value) Manual setup...
Setting the work timer Setting the work timer You can set the work day and work time for the lawnmower to operate. You can also specify a specific area for each work time. Work timer You can select the day and time on which you want the lawnmower to operate.
Setting the work timer Mowing start points You can set the mowing start points for each day of week. For example, if you set the following 5 start points in your garden, you enable the lawnmower to reach other areas through narrow passages for a better efficiency.
Setting the work timer Seasonal timer The growth speed of lawn depends on the season. With this function, you can configure the ratio of the mowing time for each season. Menu screen Home screen [1.Work timer] [3.Seasonal timer] [1.Auto setup] Press the H button to return to the previous screen.
Setting the work timer Quiet timer You can set the blade speed, wheel speed and timer for operating the lawnmower quietly. Menu screen Home screen [1.Work timer] [4.Quiet timer] (“ON” is checked) Select [Blade speed] and press the H button. Configure this setting to operate the lawnmower with If you want the lawnmower to mow on your low noise during the period which you configure.
Setting the lawnmower operation Setting the lawnmower operation Auto mode You can set up the advanced auto mode settings as follows: Setting the angle to turn from the boundary wire Setting the distance to the start point When leaving the boundary wire, set the angle to turn Until the lawnmower reaches a set starting point from the boundary wire.
Page 41
Setting the lawnmower operation Distance from the boundary wire when the lawnmower goes toward the mowing start points: The lawnmower moves between the boundary wire and the specified value at random as it goes toward the mowing start point. Narrow passage Low value Low value High value...
Page 42
Setting the lawnmower operation Mowing start points Menu screen Home screen [2.Garden setup] [1.Auto mode] [1.Mowing start points] [1.Point 1] to [5.Point 5] Select (Clockwise) or (Anticlockwise), enter the values of the The lawnmower travels to this location along the distance from the docking station to start boundary wire, and then turns away from the cutting, and enter a percentage of the...
Page 43
Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [2.Mowing pattern] [1.Point 1] to [5.Point 5] You can select from 3 mowing patterns below: [Directional] With the [Directional] setting, when the lawnmower detects the boundary wire, it turns at a narrow angle. This is used for mowing narrow areas.
Page 44
Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [4.Edge cutting] With this function, you can mow the unmown area along the boundary wire. If the edge cutting setting is enabled, the lawnmower goes around your garden along the boundary wire to mow the edge before starting the usual mowing.
Page 45
Setting the lawnmower operation Select the day of the week on which you want the lawnmower to run with the edge cutting function, and press the H button. You can select up to two workdays per week. 1 7: 1 9 M o n 1 2 ⁄ S EP E d ge c u t ti n g S e le c t d a y s M O N...
Page 46
Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [6.Narrow passage] If there are narrow passages on your garden, you can configure the settings of the narrow passages to let the lawnmower pass through them toward the starting point. A : Distance between the docking station and the start of the narrow passage.
Setting the lawnmower operation Manual mode With this function, you can configure the lawnmower to mow without the work timer function. NOTE: - If you want to operate the lawnmower with [Manual mode], see “Operating the lawnmower with the Manual mode” (M page 91) Mowing pattern You can select from 3 mowing patterns below: [Directional]...
Page 48
Setting the lawnmower operation Spiral cutting: With this function, the lawnmower can be focused on mowing the area where the lawn is not completely mown, or the growth speed of the lawn is fast. The lawnmower detects the dense area and mow there spirally.
Setting the lawnmower operation Garden layout Menu screen Home screen [2.Garden setup] [3.Garden layout] [1.Docking direction] Select the set pattern. There are 4 installation methods. You can set the direction for the lawnmower to move in relation to the docking station. Gar den l ay out NOTE: Docking direction...
Setting the lawnmower operation Homing setup Menu screen Home screen [2.Garden setup] [4.Homing setup] [1.Passage width] You can input a value from 0 to 15 for the setup level. Passage width sample table You can set the minimum and maximum gap Setup level Passage width between the lawnmower and boundary wire when the...
Page 51
Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [4.Homing setup] [2.Capacity for homing] Select [Auto] or Enter a percentage of battery residual capacity. You can set the percentage of remaining amount of The range of the percentage of battery the battery when the lawnmower starts to go back to residual capacity is 10 –...
Setting the lawnmower operation Cutting height Menu screen Home screen [2.Garden setup] [5.Cutting height] [1.Auto setup] Set the “Target cutting height” with the buttons or number buttons and lawnmower will gradually reduce the cutting height press the H button. from the “start height” to the “target height” that you prefer.
Page 53
Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [5.Cutting height] [2.Manual setup] Set the cutting height with the buttons and press the H button. You can configure the cutting height. When you select [Calibrate] and press the NOTE: H button, the blade disc moves to the set - We recommend that you set a height that cuts off cutting height.
Checking the system Checking the system Check signal You can check if the boundary wire signal is correctly reaching the lawnmower and confirm how strong the signal is. Menu screen Home screen [3.Diagnostics] [1.Check signal] Signal level indication Signal strength No loop signal Weak Moderate...
Checking the system Test start points You can check whether the lawnmower can correctly return to the docking station, and whether it can reach each start points according to settings. Menu screen Home screen [3.Diagnostics] [2.Test start points] [1.Point1] to [5.Point5] Select a point from 1 to 5 which you want to test and press the H button.
Page 56
Checking the system Menu screen Home screen [3.Diagnostics] [2.Test start points] [0.Home] Select [Clockwise(CW)] or [Anticlockwise(ACW)]. You can test if the lawnmower will correctly return to the docking station. Press the H button. Confirm the selecting information of the NOTE: selected direction to home.
Viewing history Viewing history Operation history You can check the cumulative time that the lawnmower has operated and recharged. Menu screen Home screen [4.History] [1.Operating history] [1.Operating time] Check the history. You can view how long the lawnmower has mowed, and how long the lawnmower has charged.
Viewing history Work history Menu screen Home screen [4.History] [1.Operating history] [2.Work history] Check the history by pressing the down buttons to scroll the menu. You can view the lawnmower’s cutting history (when the lawnmower was mowing), return history (when Press the G button to return to the the lawnmower was returning to the docking station), previous screen.
Viewing history Fault history You can view the lawnmower’s fault history (when a fault occurred). Menu screen Home screen [4.History] [2.Fault history] Select fault history entry by using the buttons. The history of errors that have occurred are logged. Press the H button. NOTE: Fault information is displayed.
Setting the system Setting the system Language You can set the menus of the display to your preferred language. Menu screen Home screen [5.System settings] [1.Language] Select your preferred language. Select the language shown in the display from among 12 languages. Press the H button to return to the previous screen.
Setting the system Menu screen Home screen [5.System settings] [2.Display/Sound] [Keypad] Select [ON] or [OFF] by pressing the buttons. You can set whether or not a beep sound is emitted when you press control panel buttons. Press the H button to return to the previous screen.
Setting the system Security Security settings are used to prevent the lawnmower from being operated by other people. Menu screen Home screen [5.System settings] [4.Security] [1.Alarm] NOTE: - Before selecting [1.Alarm], you will need to input your PIN. If you forget your PIN, contact your dealer. Select [ON] or [OFF] by pressing the buttons.
Menu screen Press and hold number button “0” 11:04 Wed 24/ FEB Help Honda Pow er E quip ment This is the model name. Miimo : H R M 300 0K1 : MB F F - 1000001 This is the frame serial number.
About Mii-monitor / Installing Mii-monitor Mii-monitor Preparation About Mii-monitor Mii-monitor is a smartphone/tablet application for the HRM3000. It communicates with the HRM3000 via Bluetooth ® For operation, use a smartphone that can access the internet. NOTE: - The images in this manual are for visual reference only. They may differ from the actual product.
Pairing a device (connecting via Bluetooth®) Pairing a device (connecting via Bluetooth ® • It is not possible to connect more than one user id to the same lawnmower. If you want to connect more than one smartphone/tablet to your lawnmower, the same user id must be used on all devices. •...
Page 66
Tap [Term & Conditions] and confirm the content. If you agree, tap [Agree]. Check that the input is correct. Tap [Registration] to send the inputted information to the Honda server. Failed Try again after a while. Also, check if you Input [User Information].
Page 67
Menu display after connecting to a device Menu display after connecting to a device If there is a nearby smartphone that can be connected when you press STOP button, the following screen is displayed. 17:01 T hu 25/F EB Displayed if a device is available for connection.
Checking the mowing area / Connecting to a power source USAGE Checking the mowing area Before operating the lawnmower, ensure the mowing area is free of pets and foreign objects. Turn off the lawnmower before removing any foreign objects. CAUTION: - If there are any holes (such as rabbit holes, etc.) in the work area, fill them in so that the work area is level. Periodically check the work area for holes.
Connecting to a power source / Checking the lawnmower / Turning on / off the power Attach the station cover to the docking station. CAUTION: Do not secure the power cord with the pegs used to secure the boundary wire. Doing so may damage the power cord.
Page 70
Turning on / off the power Press the A (On) button on the control panel. The power turns on, and the startup screen on the control panel is displayed. Entering your PIN (Personal Identification Number) When turning the lawnmower on, you must enter the PIN. Enter the PIN using the number buttons.
Operating the lawnmower in Auto mode Operating the lawnmower in Auto mode These instructions can be used to operate the lawnmower at the time scheduled for the Auto mode settings. NOTE: - For details on settings, see “4 MENU SETTINGS” (M page 32). N WARNING - Make sure to press the manual STOP button before performing the following procedure.
Setting the height of the blades Setting the height of the blades The height of the blades determines how tall or short the grass will be cut. Test the lawnmower on a small area and adjust blade height according to your preference. N WARNING - Make sure to press the manual STOP button before performing the following procedure.
Page 73
Setting the height of the blades Manual setup CAUTION: - Avoid cutting too much at once. Mow gradually step by step. - Avoid cutting more than 5 mm of grass at once. If you want to cut more than 5 mm, it should be done gradually in steps of 5 mm maximum per week.
Weekly checks Weekly checks Check the lawnmower and docking station once a week to remove dirt and grass. Also check if the blades and blade disc have been damaged, and verify that there are no other problems. Cleaning the lawnmower and docking station Dirt and grass may accumulate on the top and bottom of the lawnmower, docking station, and charging plug during and after mowing.
Carrying the lawnmower Carrying the lawnmower When carrying the lawnmower, observe the following points. N WARNING - Do not carry the lawnmower with the blades pointed toward you. - Take care to avoid dropping the lawnmower when carrying it. - Make sure to press the manual STOP button and press the B (Off) button to turn the power off before performing the following procedure.
Before contacting your dealer TROUBLESHOOTING Before contacting your dealer In the unlikely event that you are facing a problem and you need to contact your dealer, ensure that you have the following information available. • Owner’s Manual • Consider any recent work in your garden. •...
Messages Messages If any of the following messages appear in the display, use this troubleshooting guide to address the problem before contacting your dealer. If the problem persists, contact your dealer. Message Cause Solution Area signal lost The lawnmower does not detect the Check if the boundary wire connectors are boundary wire signal.
Page 78
Messages Message Cause Solution No boundary The lawnmower does not detect the Check if the boundary wire connectors are boundary wire signal. correctly connected. signal Check a power supply of docking station. See “Test start points” (M page 53). If the message does not disappear, contact your dealer.
Resolving problems Resolving problems Unless having the power on is necessary to check something, turn off the power when checking the condition of the lawnmower or the blade. Problem Solution The lawnmower cannot be Check the cable connections, confirm that the docking station’s LED indicator charged.
Page 80
Resolving problems Problem Solution Noticeable wheel tracks. Try to reduce the work timer. You can reduce the work timer automatically by using “Seasonal timer”. Try to increase “passage width”. The lawnmower does not enter Check the “passage width” setting. If necessary, you can use the “Narrow narrow corridors.
The required service intervals and the kind of maintenance to be performed are described in the following chart. Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will be able to perform a variety of checks and software updates that cannot be completed by the owner.
Page 82
Maintenance procedures Preparing • Put on a pair of work gloves. • When checking the blades, turn the lawnmower on its side. Cleaning N WARNING - Do not touch the blades with your hands. - Do not lift the lawnmower off of the ground while checking or cleaning it. - Make sure to press the manual STOP button and press the B (Off) button to turn the power off before performing the following procedures.
Page 83
Maintenance procedures Cleaning the docking station N WARNING - Unplug the AC adapter’s plug from the power outlet (House) before cleaning it. NOTE: - Do not wash the docking station with water. The docking station may be damaged. Clean dirt and grass off of the docking station using a plastic brush. Brush off dirt and grass from docking station, particularly around parts on which the lawnmower rests and around the charging plugs area: Charging plug...
Page 84
Maintenance procedures Checking the docking station Check item(s) Action Damage to the docking Visually inspect the docking station. Docking station station If it is damaged, consult your dealer. Visually inspect the metal contacts on the charging plug for corrosion, which can be identified by a greenish discoloration on the Condition of the charging Charging plug...
Page 85
Maintenance procedures Check item(s) Action Check if there is a gap between the docking Gap between the docking station’s charging plug and the lawnmower’s station’s charging plug and Docking station charging socket. If there is none, adjust the the lawnmower’s charging docking station according to the installation socket conditions (M page 12), or consult your dealer.
Page 86
Maintenance procedures Checking the docking station screws Check item(s) Action Visually inspect the screws. Loosened screws of the Docking station If they are loose, tighten them with a flat-blade docking station screwdriver. Correct Incorrect Screw Checking the boundary wire connectors and 4 pins connector Check item(s) Action Visually inspect the boundary wire connectors...
Page 87
Maintenance procedures Checking the rear (drive) tire tread depth Check item(s) Action Measure the depth of the treads at the center of Tread depth of the rear the tire. Rear (drive) tire (drive) tire If they are 3 mm or less, contact a service dealer.
Page 88
Maintenance procedures Checking the charge socket Check item(s) Action Visually inspect the metal parts of the charge Charge socket clogged with socket. grass clippings. If the charge socket is clogged with grass, remove the grass clippings. Charge socket Visually inspect the metal contacts of the charge socket for wear, corrosion, or damage.
Page 89
Maintenance procedures Checking the blades and blade disc Check the condition of the blades and blade disc as follows. Lifetime of the blades In order to have good cutting performance, maintain the sharp cutting edge on the blades. Typically, the lifetime of the blades is 160 hours.
Page 90
Maintenance procedures Replacing the blades To replace the blades, perform the procedures below. N WARNING - Put on a pair of work gloves before performing the following procedures. - Do not touch the blade while it is spinning. You may be injured if you do so. NOTE: - This work requires technical skill and knowledge, as well as special tools.
(e.g. electrical junction box) to ensure they do not corrode over the winter period. Honda recommends that all electrical components such as the AC adapter should be stored in a dry, frost free environment that is not exposed to the winter weather.
Specifications TECHNICAL INFORMATION Specifications Model HRM3000K1 Description code MBFF Type Length 710 mm Width 550 mm Height 300 mm Weight 13.9 kg Electrical system Li-ion Battery 21.6 V / 5700 mAh Input AC 230 V AC 240 V AC 230 V AC adapter Output 29.5 V / 4.3 A...
Operating the lawnmower with the Manual mode APPENDIX Operating the lawnmower with the Manual mode Use Manual mode when you want to ignore work timer settings. As an example, you can move the lawnmower yourself if there is a narrow passage less than 1 m in the boundary wire range and the lawnmower cannot pass through.
Page 94
Operating the lawnmower with the Manual mode Select an operation of lawnmower. Items Description Mow until empty The lawnmower works until battery is empty. Mow then recharge continuously The lawnmower works and charges until the work mode is changed to Auto mode by the user. Mow then resume auto timer You can specify how many times the lawnmower works and charges (1 –...
Page 95
Operating the lawnmower with the Manual mode Select the operation of lawnmower after going back 15: 45 Web 24/F EB to the docking station. Go bac k Hom e Then aft er c har gi ng: Res tart on nex t ti m er Pause m owi ng at hom e for s pec i fi ed ti m e.
Major Honda Distributor Addresses Major Honda Distributor Addresses AUSTRIA BALTIC STATES BELARUS BELGIUM BULGARIA Honda Motor Europe Ltd (Estonia/Latvia/Lithuania) UAB JP Motors Honda Motor Europe Ltd Premium Motor Ltd Hondastraße 1 NCG Import Baltics OU Montazhnikov lane 4th, 5-16 Doornveld 180-184...
“EC Declaration of Conformity” CONTENT OUTLINE “EC Declaration of Conformity” CONTENT OUTLINE *1 : See specification page *2 : See original EC Declaration of Conformity...
Page 98
“EC Declaration of Conformity” CONTENT OUTLINE...
Page 99
“EC Declaration of Conformity” CONTENT OUTLINE...
Page 100
“EC Declaration of Conformity” CONTENT OUTLINE...
LCD MENU INDEX Menu name Step Page Alarm System settings → Security P.60 Auto mode Garden setup → Auto mode P.38 BG color System settings → Display/Sound P.58 Capacity for homing Garden setup → Homing setup P.49 Check signal Diagnostics P.52 Contrast System settings →...
DEALER CHECKSHEET The following information is provided by your dealer after setup is complete. You can save your settings using Mii-monitor and restore them in case you made unwanted modifications. You can also restore your dealer’s recommended settings from Mii-monitor to your lawnmower. Basic setting information (M pages 18, 60) PIN (Personal Identification Number): Language : English / Deutsch / Français / Italiano / Nederlands / Svenska / Norsk / Español / Polski / Dansk /...
Page 107
Other setting item information Please fill the following items if configuring them with the Menu settings. Garden layout setting information (M pages 40, 44, 47, 48) Passage width: Home screen [2.Garden setup] [1.Auto mode] [1.Mowing start points] [1.Point 1] to [5.Point 5] Point 1: Point 2: Point 3:...
QUICK GUIDE Fundamentals Turning on / off the power Sending back home Mii-monitor (M page 11, 67) (M page 11) Refer to the Mii-monitor Operation Guide. Operate within a distance of about 3 m from the lawnmower. Stopping the lawnmower (M page 10) Daily use Menu settings...
Page 109
Technical tips Mowing mode You can select from 2 modes of operation (available in “Menu Settings”). Auto mode (M page 38) The lawnmower automatically mows according to inputted time and garden settings. Manual mode (M page 45) Start mowing anytime without timer settings. Cleaning the lawnmower (M page 80) NOTE: - Never use a scraper.