Honda HRM300 Manual page 187

dummyhead dummyhead
INSTALLATION
SAFETY INSTRUCTIONS
INSTALLATION
PRECAUTIONS
Carefully observe the following precautions.
• Make sure to keep your hands, feet and any other body parts away from the rotating blades.
• Do not touch sharp components such as the blades or blade disc other than when performing maintenance.
• Always press the MANUAL STOP BUTTON first before you physically interact with the lawnmower such as lifting, turning
sideway or upside down.
MANUAL STOP BUTTON
• Local regulations may restrict the age of the operator.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people
or their property.
• Before using the robotic lawnmower or entering the work area, persons using a pacemaker or other medical device should
consult a doctor.
• Do not ride on the lawnmower, push the lawnmower, or use it for anything other than its intended purpose.
• Never use the lawnmower in the immediate vicinity of people, especially children or pets.
• Carry out your mowing operation only within the boundary wire area.
• Do not use automatic lawn watering systems while the lawnmower is operating, as the watering equipment may become
damaged and the likelihood of water penetration into the lawnmower is greatly increased. Adjust lawnmower and watering
system timers so they do not operate at the same time.
• If there is a risk of adverse weather such as lightning or a storm, stop operation and disconnect the power cord.
• Parts of this product may become warm in direct sunlight. Make sure you do not touch these parts if they become extremely hot
or you may burn yourself.
• Do not charge the lawnmower with anything other than the docking station. An accident may occur or the lawnmower may be
damaged.
• If the power supply cord is damaged, immediately stop using the system.
• If there are any holes (such as rabbit holes, etc.) in the work area, fill them in so that the work area is level. Periodically check
the work area for holes.
• Do the preventive measure of static electricity by using commercially available goods such as grounded wrist strap before you
handle internal components (main ECU, station ECU, display, battery and sensor etc). If you do not have one, touch both of your
hands to a safely grounded object or to an unpainted metal surface.
3-2