Honda HRM3000 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Lawn Mower
  5. HRM3000
  6. Owner's manual

Honda HRM3000 Owner's Manual

Robotic lawnmower
Hide thumbs Also See for HRM3000:
Table of Contents

Advertisement

Quick Links

EN
Honda
Robotic
Lawnmower
HRM3000
Owner's Manual
Original Instructions
Please refer to "5.Mii-monitor Preparation" how to install the Mii-monitor and setting of Bluetooth
®
.

Advertisement

Table of Contents
loading

Related Manuals for Honda HRM3000

Summary of Contents for Honda HRM3000

  • Page 1 Honda Robotic Lawnmower HRM3000 Owner’s Manual Original Instructions Please refer to "5.Mii-monitor Preparation" how to install the Mii-monitor and setting of Bluetooth ®...
  • Page 3 Congratulations on your selection of a Honda Robotic Lawnmower. We are confi dent that you will enjoy the benefi t of your Honda Robotic Lawnmower as we take great pride in creating the fi nest quality lawn care products. We want to help you get the best results from your new robotic lawnmower and to operate it safely. This manual contains all the information on how to do that;...

  • Page 4: Table Of Contents

    CONTENTS Setting Safety Instructions Preparation Menu Settings - Component identifi cation - Setting the work timer (M page 10) (M page 32) - Installation (M page 12) - Setting the lawnmower operation - Setting up the lawnmower (M page 36) (M page 17) - Checking the system (M page 49)
  • Page 5 1 OVERVIEW ........................4 How the Honda Robotic Lawnmower works ..4 2 SAFETY INSTRUCTIONS ..................6 Precautions ..........6 Observe the following points for your safety ... 7 Label locations ..........9 3 PREPARATION .......................10 Component identifi cation ......10 Installation........... Setting up the lawnmower ......17...

  • Page 6: Overview

    How the Honda Robotic Lawnmower works OVERVIEW How the Honda Robotic Lawnmower works The mowing area is determined by the boundary wire that emits a signal; when the lawnmower detects the boundary it turns and it cuts the grass randomly. When battery starts running out, it goes back to the docking station.
  • Page 7 How the Honda Robotic Lawnmower works Laying boundary wire The boundary wire location determines the parameters of the mowing area, this area may consist of multiple sections in which the lawnmower can operate. For mowing start point setup and detailed information please see “4 MENU SETTINGS” (M page 30).

  • Page 8: Safety Instructions

    Precautions SAFETY INSTRUCTIONS Precautions Carefully observe the following precautions. • Make sure to keep your hands, feet and any other body parts away from the rotating blades. • Do not touch sharp components such as the blades or blade disc other than when performing maintenance.

  • Page 9: Observe The Following Points For Your Safety

    Precautions / Observe the following points for your safety • If the outside air temperature is lower than 5°C, the lawnmower will be unable to charge. If lower than 0°C, the lawnmower will not charge nor operate. • If there is a risk of adverse weather such as lightning or a storm, stop operation and disconnect the power cord.
  • Page 10 • Never attempt to tamper with the lawnmower. It can cause an accident as well as damage to the lawnmower. Disposal To protect the environment, do not dispose of this product, battery, etc. carelessly by leaving them in the waste. Observe the local laws and regulations or consult your authorised Honda dealer for disposal.

  • Page 11: Label Locations

    You are also asked to carefully read the safety regulations in the applicable chapter of this handbook. The Honda Robotic Lawnmower is designed to give safe and dependable service if operated according to ®...

  • Page 12: Preparation

    Component identification PREPARATION Component identifi cation Body Top view Bottom view Charging socket Front (caster) wheels (2) Manual STOP button When you press the Blade disc manual STOP button, the control panel cover pops up. Blades (3) Carrying area Control panel Rear (drive) wheels (2) Docking station The lawnmower recharges at the docking...

  • Page 13: Control Panel

    Component identification Control panel Up/down buttons Display Press to navigate to the previous/ The home screen and menus next item in the display. can be seen here while the Back button lawnmower is turned on. Press to return to the previous menu in the display.

  • Page 14: Installation

    Installation Installation We recommend that an authorised Honda dealer performs the installation of your Robotic Lawnmower. Checking conditions for installation Check with the dealer that performed the installation if the docking station and boundary wire are installed according to the conditions below. Also periodically confi rm that these conditions are still met.
  • Page 15 Installation Image Condition Example of correct installation Pattern 1 Pattern 1: Standard installation Connect the docking station perpendicular to the wire. within 30 cm 0 cm or more Pattern 2 / Pattern 3 Pattern 2: Clockwise installation Connect the docking station parallel to the wire 5 cm or more 5 cm or more (in the clockwise direction).
  • Page 16 Installation Conditions for laying the boundary wire Image Condition Height of objects which the lawnmower might run on top of Lay boundary wire around objects which the lawnmower might run on top of (e.g. rocks, tree roots, etc.); these objects must be removed from the work area.
  • Page 17 Installation Image Condition More than 3 m Boundary wire of More than 1 m Docking the another robotic lawnmower station Boundary wire If you want to use an additional robotic lawnmower, the boundary wire must be laid according to the fi gure on the left. More than 3 m Boundary wire of More than 1 m...
  • Page 18 Installation Installing boundary wire and connecting to the docking station Image Operation Set the boundary wire by using the “LAWN Boundary wire DIAGRAM” (M page 97). • Leave enough wire to ensure that small adjustments can be made, double backing outside of the loop is acceptable.

  • Page 19: Setting Up The Lawnmower

    Setting up the lawnmower Setting up the lawnmower When turning the lawnmower on initially, the initial settings will appear. Through the initial settings, you can confi gure the display language, internal date and time, and create your PIN (Personal Identifi cation Number). Once initial settings are done, you can confi...
  • Page 20 Setting up the lawnmower Initial settings When turning the lawnmower on initially, the initial settings will appear to set the display language, internal date and time, and create your PIN (Personal Identifi cation Number). Initial settings are performed on the control panel. After initial settings, you can use Mii-monitor to change the settings.
  • Page 21 Setting up the lawnmower Confi guring the settings through the setup wizard This section explains the setup wizard procedure using the control panel on the lawnmower. The setup wizard will guide you to confi gure the settings for your mowing operation as follows: Confi...

  • Page 22: Setting The Cutting Height

    Setting up the lawnmower Setting the cutting height Through this setting, you can set the height of the lawnmower blades. Select [1.Setup wizard] and press the S el ec t in s t all me nu button. 1 . Se t up wi z ar d Setup wizard top screen is displayed.
  • Page 23 Setting up the lawnmower Setting the garden layout Through this setting, you can confi gure the information of your garden layout for operating the lawnmower. [2.Garden layout] is selected. Press the H button to S et up wiz ar d 2 / 5 confi...
  • Page 24 Setting up the lawnmower Setting the mowing start points Through this setting, you can set the starting point to operate the lawnmower. If you set the mowing start points and combine them with the settings of work timer, you can effectively mow your garden.
  • Page 25 Setting up the lawnmower Testing the Start points Through this testing, you can check the start points which you added in [3.Mowing start points]. NOTE: - Perform each test when the lawnmower is connected to the docking station. Select [4.Test start points] and press the S et up wiz ar d 4 / 5 button to check the start points.
  • Page 26 Setting up the lawnmower Test the return home of the lawnmower to the Tes t s t a rt poi nt s 4 / 5 docking station. P oi nt Select [0 Home]. 5 0m Hom e N EX T Select [Clockwise (CW)] or [Anticlockwise (ACW)] Tes t r et ur n h ome 4 / 5...
  • Page 27 Setting up the lawnmower Setting the work timer With this setting, you can confi gure the work day and work time at which the lawnmower operates in auto mode. Select [5.Work timer] and press the H button to S et up wiz ar d 5 / 5 confi...
  • Page 28 Setting up the lawnmower Confi rm the days which are automatically selected Wor k t ime r 5 / 5 referring to the boundary wire length and garden size. Select [NEXT] and press the H button to Mi nim um d ay s r eq ui r ed proceed to the timer setting screen.
  • Page 29 Setting up the lawnmower Confi rm the achieved and recommended hours per Wor k t ime r 5 / 5 week. Select [NEXT] or [No] and press the H button. If you select [NEXT], go to step 5-12. A c h ie v e d If you select [No], go to step 5-5.
  • Page 30 Setting up the lawnmower Confi guring the settings through the advanced setup The advanced setip will guide you to confi gure the settings for your mowing operation as follows: Menu name Settings [1. Mowing setting] - Mowing pattern - Wire overlap - Edge cutting - Spiral cutting [2.
  • Page 31 Setting up the lawnmower Select [ON] or [OFF] and press the H button. Mo win g s et t in g If you select [ON], go to step 1-6. E dg e c ut t in g If you select [OFF], go to step 1-8. O FF N E XT Select [CW], [ACW], or [Mixed] for the edge cutting...

  • Page 32: Usage

    Menu overview MENU SETTINGS The control panel menus are used to set how the lawnmower operates. The menu settings can also be accessed in Mii-monitor. You can use Mii-monitor to save the settings. You can also restore saved settings. Menu overview NOTE: - We recommend having your dealer change these settings during installation.
  • Page 33 Menu overview Full menu diagram Menu Work timer Work timer 1 From/To (Input value) : This indicates that the item can be set MON/TUE/WED/THU/FRI/SAT/SUN through the Setup wizard. 2 From/To (Input value) Mowing start points MON/TUE/WED/THU/FRI/SAT/SUN Point 1/2/3/4/5 JAN/FEB/MAR/APR/MAY/JUN/JUL/AUG/SEP/OCT/NOV/DEC (Input value) Seasonal timer Modify timer JAN/FEB/MAR/APR/MAY/JUN/JUL/AUG/SEP/OCT/NOV/DEC (Input value)

  • Page 34: Setting The Work Timer

    Setting the work timer Setting the work timer You can set the work day and work time for the lawnmower to operate. You can also specify a specifi c area for each work time. Work timer You can select the day and time on which you want the lawnmower to operate.

  • Page 35: Mowing Start Points

    Setting the work timer Mowing start points You can set the mowing start points for each day of week. For example, if you set the following 5 start points in your garden, you enable the lawnmower to reach other areas through narrow passages for a better effi...

  • Page 36: Seasonal Timer

    Setting the work timer Seasonal timer The growth speed of lawn depends on the season. With this function, you can confi gure the ratio of the mowing time for each season. Menu screen Home screen [1.Work timer] [3.Seasonal timer] [1.Modify timer] Enter a percentage of each month using the number buttons.

  • Page 37: Quiet Timer

    Setting the work timer Quiet timer You can set the blade speed, wheel speed and timer for operating the lawnmower quietly. Menu screen Home screen [1.Work timer] [4.Quiet timer] (“ON” is checked) Select [Blade speed] and press the H button. Confi...

  • Page 38: Setting The Lawnmower Operation

    Setting the lawnmower operation Setting the lawnmower operation Auto mode You can set up the advanced auto mode settings as follows: Setting the angle to turn from the boundary wire Setting the distance to the start point When leaving the boundary wire, set the angle to turn Until the lawnmower reaches a set starting point from the boundary wire.
  • Page 39 Setting the lawnmower operation Distance from the boundary wire when the lawnmower goes toward the mowing start points: The lawnmower moves between the boundary wire and the specifi ed value at random as it goes toward the mowing start point. Narrow passage Low value Low value...
  • Page 40 Setting the lawnmower operation Mowing start points Menu screen Home screen [2.Garden setup] [1.Auto mode] [1.Mowing start points] [1.Point 1] to [5.Point 5] Select (Clockwise) or (Anticlockwise), enter the values of the The lawnmower travels to this location along the distance from the docking station to start boundary wire, and then turns away from the cutting, and enter a percentage of the...
  • Page 41 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [2.Mowing pattern] [1.Point 1] to [5.Point 5] You can select from 3 mowing patterns below: [Directional] With the [Directional] setting, when the lawnmower detects the boundary wire, it turns at a narrow angle. This is used for mowing narrow areas.
  • Page 42 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [4.Edge cutting] With this function, you can mow the unmown area along the boundary wire. If the edge cutting setting is enabled, the lawnmower goes around your garden along the boundary wire to mow the edge before starting the usual mowing.
  • Page 43 Setting the lawnmower operation Select the day of the week on which you want the lawnmower to run with the edge cutting function, and press the H button. You can select up to two workdays per week. 1 7:19 Mo n 1 2 ⁄ S EP E dge cut tin g S elect day s Finish...
  • Page 44 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [1.Auto mode] [6.Narrow passage] If there are narrow passages on your garden, you can confi gure the settings of the narrow passages to let the lawnmower pass through them toward the starting point. A : Distance between the docking station and the start of the narrow passage.

  • Page 45: Manual Mode

    Setting the lawnmower operation Manual mode With this function, you can confi gure the lawnmower to mow without the work timer function. NOTE: - If you want to operate the lawnmower with [Manual mode], see “Operating the lawnmower with the Manual mode”...
  • Page 46 Setting the lawnmower operation Spiral cutting: With this function, the lawnmower can be focused on mowing the area where the lawn is not completely mown, or the growth speed of the lawn is fast. The lawnmower detects the dense area and mow there spirally.

  • Page 47: Garden Layout

    Setting the lawnmower operation Garden layout Menu screen Home screen [2.Garden setup] [3.Garden layout] [1.Docking direction] Select the set pattern. There are 4 installation methods. You can set the direction for the lawnmower to move in relation to the docking station. G ar d en la y o ut NOTE: Docking direction...

  • Page 48: Homing Setup

    Setting the lawnmower operation Homing setup Menu screen Home screen [2.Garden setup] [4.Homing setup] [1.Passage width] You can input a value from 0 to 15 for the setup level. Passage width sample table You can set the minimum and maximum gap Setup level Passage width between the lawnmower and boundary wire when the...
  • Page 49 Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [4.Homing setup] [2.Capacity for homing] Select [Auto] or Enter a percentage of battery residual capacity. You can set the percentage of remaining amount of The range of the percentage of battery the battery when the lawnmower starts to go back to residual capacity is 10 –...

  • Page 50: Cutting Height

    Setting the lawnmower operation Menu screen Home screen [2.Garden setup] [5.Cutting height] Set the cutting height with the buttons and press the H button. You can confi gure the cutting height. When you select [Calibrate] and press the NOTE: H button, the blade disc moves to the set - We recommend that you set a height that cuts off cutting height.

  • Page 51: Checking The System

    Checking the system Checking the system Check signal You can check if the boundary wire signal is correctly reaching the lawnmower and confi rm how strong the signal is. Menu screen Home screen [3.Diagnostics] [1.Check signal] Signal level indication Signal strength No loop signal Weak Moderate...

  • Page 52: Test Start Points

    Checking the system Test start points You can check whether the lawnmower can correctly return to the docking station, and whether it can reach each start points according to settings. Menu screen Home screen [3.Diagnostics] [2.Test start points] [1.Point1] to [5.Point5] Select a point from 1 to 5 which you want to test and press the H button.
  • Page 53 Checking the system Menu screen Home screen [3.Diagonostics] [2.Test start points] [0.Home] Select [Clockwise(CW)] or [Anticlockwise(ACW)]. You can test if the lawnmower will correctly return to the docking station. Press the H button. Confi rm the selecting information of the NOTE: selected direction to home.

  • Page 54: Viewing History (M

    Viewing history Viewing history Operation history You can check the cumulative time that the lawnmower has operated and recharged. Menu screen Home screen [4.History] [1.Operating history] [1.Operating time] Check the history. You can view how long the lawnmower has mowed, and how long the lawnmower has charged.

  • Page 55: Work History

    Viewing history Work history Menu screen Home screen [4.History] [1.Operating history] [2.Work history] Check the history by pressing the down buttons to scroll the menu. You can view the lawnmower’s cutting history (when the lawnmower was mowing), return history (when Press the G button to return to the the lawnmower was returning to the docking station), previous screen.

  • Page 56: Fault History

    Viewing history Fault history You can view the lawnmower’s fault history (when a fault occurred). Menu screen Home screen [4.History] [2.Fault history] Select fault history entry by using the buttons. The history of errors that have occurred are logged. Press the H button. NOTE: Fault information is displayed.

  • Page 57: Setting The System (M

    Setting the system Setting the system Language You can set the menus of the display to your preferred language. Menu screen Home screen [5.System settings] [1.Language] Select your preferred language. Select the language shown in the display from among 12 languages. Press the H button.

  • Page 58: Date And Time

    Setting the system Menu screen Home screen [5.System settings] [2.Display/Sound] [Keypad] Select [ON] or [OFF] by pressing the buttons. You can set whether or not a beep sound is emitted when you press control panel buttons. Press the H button. Press the G button to return to the previous screen.

  • Page 59: Security

    Setting the system Security Security settings are used to prevent the lawnmower from being operated by other people. Menu screen Home screen [5.System settings] [4.Security] [1.Alarm] NOTE: - Before selecting [1.Alarm], you will need to input your PIN. If you forget your PIN, contact your dealer. Select [ON] or [OFF] by pressing the buttons.

  • Page 60: Reset

    Setting the system Reset You can reset all settings to the factory defaults. Menu screen Home screen [5.System settings] [5.Reset] [1.Factory reset] Input your PIN and press the H button. Execute this command to revert all settings to their factory defaults. Select [Yes].

  • Page 61: Mii-Monitor Preparation

    About Mii-monitor / Installing Mii-monitor Mii-monitor Preparation About Mii-monitor Mii-monitor is a smartphone/tablet application for the HRM3000. It communicates with the HRM3000 via Bluetooth ® For operation, use a smartphone that can access the internet. NOTE: - The images in this manual are for visual reference only. They may differ from the actual product.

  • Page 62: Pairing A Device

    Pairing a device (connecting via Bluetooth®) Pairing a device (connecting via Bluetooth ® • To operate the lawnmower with Mii-monitor, you must pair it with a smartphone/tablet. • To pair the lawnmower, Initial Settings on the lawnmower must be completed. •...
  • Page 63 If you agree, tap [Agree]. QR code Manual input Check that the input is correct. Tap [Registration] to send the inputted information to the Honda server. Failed Try again after a while. Also, check if you can connect to the network.
  • Page 64 Menu display after connecting to a device Menu display after connecting to a device If there is a nearby smartphone that can be connected when you press STOP button, the following screen is displayed. 1 7 : 01 Th u 2 5/ F EB Displayed if a device is available for connection.

  • Page 65: Usage

    Checking the mowing area / Connecting to a power source USAGE Checking the mowing area Before operating the lawnmower, ensure the mowing area is free of pets and foreign objects. Turn off the lawnmower before removing any foreign objects. CAUTION: - If there are any holes (such as rabbit holes, etc.) in the work area, fi...

  • Page 66: Checking The Lawnmower

    Connecting to a power source / Checking the lawnmower / Turning on / off the power Attach the station cover to the docking station. CAUTION: Do not secure the power cord with the pegs used to secure the boundary wire. Doing so may damage the power cord. Connect the AC adapter plug to a power outlet with the designated voltage.

  • Page 67: Operation

    Turning on / off the power Press the A (On) button on the control panel. The power turns on, and the startup screen on the control panel is displayed. Entering your PIN (Personal Identifi cation Number) When turning the lawnmower on, you must enter the PIN. Enter the PIN using the number buttons.

  • Page 68: Operating The Lawnmower In Auto Mode

    Operating the lawnmower in Auto mode Operating the lawnmower in Auto mode These instructions can be used to operate the lawnmower at the time scheduled for the Auto mode settings. NOTE: - For details on settings, see “4 MENU SETTINGS” (M page 30). N WARNING - Make sure to press the manual STOP button before performing the following procedure.

  • Page 69: Setting The Height Of The Blades

    Setting the height of the blades Setting the height of the blades The height of the blades determines how tall or short the grass will be cut. Test the lawnmower on a small area and adjust blade height according to your preference. N WARNING - Make sure to press the manual STOP button before performing the following procedure.

  • Page 70: Weekly Checks (M

    Weekly checks Weekly checks Check the lawnmower and docking station once a week to remove dirt and grass. Also check if the blades and blade disc have been damaged, and verify that there are no other problems. Cleaning the lawnmower and docking station Dirt and grass may accumulate on the top and bottom of the lawnmower, docking station, and charging plug during and after mowing.

  • Page 71: Carrying The Lawnmower

    Carrying the lawnmower Carrying the lawnmower When carrying the lawnmower, observe the following points. N WARNING - Do not carry the lawnmower with the blades pointed toward you. - Take care to avoid dropping the lawnmower when carrying it. - Make sure to press the manual STOP button and press the B (Off) button to turn the power off before performing the following procedure.

  • Page 72: Troubleshooting

    Before contacting your dealer TROUBLESHOOTING Before contacting your dealer In the unlikely event that you are facing a problem and you need to contact your dealer, ensure that you have the following information available. • Owner’s Manual • Consider any recent work in your garden. •...

  • Page 73: Messages

    Messages Messages If any of the following messages appear in the display, use this troubleshooting guide to address the problem before contacting your dealer. If the problem persists, contact your dealer. Message Cause Solution Area signal lost The lawnmower does not detect the Check if the boundary wire connectors are boundary wire signal.
  • Page 74 Messages Message Cause Solution No boundary The lawnmower does not detect the Check if the boundary wire connectors are boundary wire signal. correctly connected. signal Check a power supply of docking station. See “Test start points” (M page 50). If the message does not disappear, contact your dealer.

  • Page 75: Resolving Problems

    Resolving problems Resolving problems Unless having the power on is necessary to check something, turn off the power when checking the condition of the lawnmower or the blade. Problem Solution The lawnmower cannot be Check the cable connections, confi rm that the docking station’s LED indicator charged.
  • Page 76 Resolving problems Problem Solution Noticeable wheel tracks. Try to reduce the work timer. You can reduce the work timer automatically by using “Seasonal timer”. Try to increase “passage width”. The lawnmower does not enter Check the “passage width” setting. If necessary, you can use the “Narrow narrow corridors.

  • Page 77: Maintenance

    The required service intervals and the kind of maintenance to be performed are described in the following chart. Honda recommends annual service to be completed by your local authorised Honda dealer. The dealer will be able to perform a variety of checks and software updates that cannot be completed by the owner.
  • Page 78 Maintenance procedures Preparing • Put on a pair of work gloves. • When checking the blades, turn the lawnmower on its side. Cleaning N WARNING - Do not touch the blades with your hands. - Do not lift the lawnmower off of the ground while checking or cleaning it. - Make sure to press the manual STOP button and press the B (Off) button to turn the power off before performing the following procedures.
  • Page 79 Maintenance procedures Cleaning the docking station N WARNING - Unplug the AC adapter’s plug from the power outlet (House) before cleaning it. NOTE: - Do not wash the docking station with water. The docking station may be damaged. Clean dirt and grass off of the docking station using a plastic brush. Brush off dirt and grass from docking station, particularly around parts on which the lawnmower rests and around the charging plug area: Charging plug...
  • Page 80 Maintenance procedures Checking the docking station Check item(s) Action Damage to the docking Visually inspect the docking station. Docking station station If it is damaged, consult your dealer. Charging plug Check item(s) Action Check if there is a gap between the docking Gap between the docking station’s charging plug and the lawnmower’s station’s charging plug and...
  • Page 81 Maintenance procedures Checking the docking station screws Check item(s) Action Visually inspect the screws. Loosened screws of the Docking station If they are loose, tighten them with a fl at-blade docking station screwdriver. Correct Incorrect Screw Checking the boundary wire connectors and 4 pins connector Check item(s) Action Visually inspect the boundary wire connectors...
  • Page 82 Maintenance procedures Checking the rear (drive) tire tread depth Check item(s) Action Measure the depth of the treads at the center of Tread depth of the rear the tire. Rear (drive) tire (drive) tire If they are 3 mm or less, contact a service dealer.
  • Page 83 Maintenance procedures Checking the charge socket Check item(s) Action Visually inspect the metal parts of the charge Charge socket clogged with socket. Charge socket grass clippings. If the charge socket is clogged with grass, remove the grass clippings. Charge socket Checking the motor housing boots Check item(s) Action...
  • Page 84 Maintenance procedures Checking the blades and blade disc Check the condition of the blades and blade disc as follows. Life time of the blades In order to have good cutting performance, maintain the sharp cutting edge on the blades. Typically, the life time of the blades is 160 hours.(2 weeks to 2 months) Because the life time depends on grass condition, it may be necessary to exchange earlier than usual, especially in the spring season.

  • Page 85: Replacing The Blades

    Maintenance procedures Replacing the blades To replace the blades, perform the procedures below. N WARNING - Put on a pair of work gloves before performing the following procedures. - Do not touch the blade while it is spinning. You may be injured if you do so. NOTE: - Before replacing the blades, remove the grass clippings (M page 76) .
  • Page 86 Maintenance procedures After removing the bolt, remove the nut and blade together. - Check the shoulder of the nut for wear (M page 82). If it is worn down, replace it. - Check the bolt head for wear. If it is worn down, replace it.
  • Page 87 Maintenance procedures Replacing the blades (if the blade holder is lost) If you lose the supplied blade holder, purchase another one at your dealer as soon as possible. Item Part number Blade holder 89311-VP9-000 N WARNING - Put on a pair of work gloves before performing the following procedures. - Do not touch the blade while it is spinning.
  • Page 88 Maintenance procedures Prepare for attachment. Set the bolt on the hexagon wrench. Set the nut on the new blade hole. Set the nut and new blade while aligning the tab of the nut and the blade disc slot. Attach the bolt while holding the nut, and tighten the bolt.

  • Page 89: Storage

    (e.g. electrical junction box) to ensure they do not corrode over the winter period. Honda recommends that all electrical components such as the AC adapter should be stored in a dry, frost free environment that is not exposed to the winter weather.

  • Page 90: Technical Information

    Specifications TECHNICAL INFORMATION Specifi cations Model HRM3000 Description code MBFF Type Length 710 mm Width 550 mm Height 301 mm Weight 13.8 kg Electrical system Li-ion Battery 22.2 V / 5400 mAh Input AC 230 V AC 240 V AC 230 V...

  • Page 91: Appendix

    Operating the lawnmower with the Manual mode APPENDIX Operating the lawnmower with the Manual mode Use Manual mode when you want to ignore work timer settings. As an example, you can move the lawnmower yourself if there is a narrow passage less than 1 m in the boundary wire range and the lawnmower cannot pass through.
  • Page 92 Operating the lawnmower with the Manual mode Select an operation of lawnmower. Items Description Mow until empty The lawnmower works until battery is empty. Mow then recharge continuously The lawnmower works and charges until the work mode is changed to Auto mode by the user. Mow then resume auto timer You can specify how many times the lawnmower works and charges (1 –...
  • Page 93 Operating the lawnmower with the Manual mode Select the operation of lawnmower after going back 1 5: 4 5 Web 24 / F EB to the docking station. G o ba c k Home T h en af t er c h ar gi ng : Res t ar t o n n ex t t i mer P au s e mowi ng at ho m e f o r t he s pec if ie d t i m e...

  • Page 94: Major Honda Distributor Addresses

    AUSTRIA BALTIC STATES BELGIUM BULGARIA CROATIA (Estonia/Latvia/ Lithuania) Honda Motor Europe Ltd Honda Motor Europe Ltd Eesti filiaal Honda Motor Europe Ltd Power Products Trading Hongoldonia d.o.o. Meistri 12 13517 Tallinn Estonia Doornveld 180-184 1731 Zellik Hondastraße 1 102A Gotz Delcev BLVD...

  • Page 95: Ec Declaration Of Conformity" Content Outline

    “EC Declaration of Conformity” CONTENT OUTLINE “EC Declaration of Conformity” CONTENT OUTLINE Français. (French) Italiano (Italian) Deutsch (German) Déclaration CE de Conformité Dichiarazione CE di Conformità EG-Konformitätserklärung 1. Le soussigné, *2, représentant du constructeur, 1. Il sottoscritto, *2 in rappresentanza del costruttore, 1.
  • Page 96 “EC Declaration of Conformity” CONTENT OUTLINE Português ( Portuguese ) Polski ( Polish ) Suomi / Suomen kieli (Finnish) Declaração CE de Conformidade Deklaracja Zgodności WE EY-VAATIMUSTENMUKAISUUSVAKUUTUS 1. O abaixo assinado, *2, representante do fabricante, 1. Niżej podpisany *2, reprezentujący 1.
  • Page 97 “EC Declaration of Conformity” CONTENT OUTLINE...

  • Page 98: Lcd Menu Index

    LCD MENU INDEX Menu name Step Page Alarm System settings → Security P.57 Auto mode Garden setup → Auto mode P.36 BG color System settings → Display/Sound P.55 Capacity for homing Garden setup → Homing setup P.46 Check signal Diagnostics P.49 Contrast System settings →...

  • Page 99: Lawn Diagram

    LAWN DIAGRAM...

  • Page 102: Dealer Checksheet

    DEALER CHECKSHEET The following information is provided by your dealer after setup is complete. You can save your settings using Mii-monitor and restore them in case you made unwanted modifi cations. You can also restore your dealer’s recommended settings from Mii-monitor to your lawnmower. Basic setting information (M pages 18, 57) PIN (Personal Identifi...
  • Page 103 Other setting item information Please fi ll the following items if confi guring them with the Menu settings. Garden layout setting information (M pages 38, 42, 45, 46) Passage width: Home screen [2.Garden setup] [1.Auto mode] [1.Mowing start points] [1.Point 1] to [5.Point 5] Point 1: Point 2: Point 3:...

  • Page 104: Quick Guide

    QUICK GUIDE Fundamentals Turning on / off the power Sending back home Mii-monitor Refer to the Mii-monitor Operation Guide. (M page 11, 64) (M page 11) Operate within a distance of about 3 m from the lawnmower. Stopping the lawnmower (M page 10) Daily use Menu settings...
  • Page 105 Technical tips Mowing mode You can select from 2 modes of operation (available in “Menu Settings”). Auto mode (M page 36) The lawnmower automatically mows according to inputted time and garden settings. Manual mode (M page 43) Start mowing anytime without timer settings. Cleaning the lawnmower (M page 76) NOTE: - Never use a scraper.
  • Page 106 MEMO...
  • Page 108 HRM3000 32VP9600 xxxx.xxxx.xx ©Honda Motor Co., Ltd. 2016 xxxx.xxxx.xx 00X32-VP9-600...

Table of Contents