BODY PANEL REPAIR PROCEDURE - Side sill (Assembly)
SIDE SILL (ASSEMBLY)
WELDLING POINTS
~""l
' '
,»^«~~.»
' • '
-
— - —
Jjl7°~ ~
= "
5
~~~ ~~^
°~ "
• MIG plug welding
§ MIG butt welding
PRO-0950
REMOVAL
1. Measure and mark vertical cutline from the rear door scuff trim
mounting hole on the rear side sill outer panel.
2. At the front and side sill, measure and mark horizontal outlines
from the door hinge mounting hole on the side outer panel as
illustration.
PRO-0960
PRO-0970
90