Hyundai TIBURON Manual page 79

BODY PANEL REPAIR PROCEDURE - Front side member (Partial)
6. Fit and clamp the radiator support panel in place.
7. MIG plug weld all holes.
8. Clean and prepare all welds, remove all residue.
9. Apply the two-part epoxy primer to the interior of the front side
member.
10. Apply an anti-corrosion agent as required
(Refer to the CORROSION PROTECTION).
11. Prepare the exterior surfaces for priming using wax and grease
remover.
12. Apply metal conditioner and water rinse.
13. Apply conversion coating and water rinse.
14. Apply the two-part epoxy primer.
OJ
PffSI
foe:
vf\
PRO-0430
15. Apply the correct seam sealer to all joints carefully
(Refer to the BODY SEALING LOCATIONS).
16. Reprime over the seam sealer to complete the repair.
82