Under Body Coat - Hyundai TIBURON Manual

CORROSION PROTECTSON - Under body coat
UNDER BODY COAT
In order to provide corrosion, stone chipping and vibration resistance, under body coat is applied to the under sides of the
floor and wheel house.
Therefore, when such panel is replaced or repaired, apply under body coat to that part.
FLOOR
COR-0050
* Because parts are to be mounted in these locations, mask the location, before applying
the under body coat.
Under body coating (Thickness 1.0 mm - 2,0 mm)
jf 80 Masking £
Dash panel
Subframe mounting rear bracket
-Dash lower member
Center floor panel
Center floor reinforcement
Side sill inner panel
£- *30 Masking
SECTION A-A' COR-0060
Side outer panel
Center floor panel
Center floor side member
SECTION B-B'
55mm
COR-0070
Rear floor center cross member
Rear floor panel
Rear floor panel-
Rear floor side member-
Jack up cross center member
Rear towing hook bracket assembly
Rear floor side member
j* 40 Masking
Rear floor side member
SECTION C-C
COR-0080
SECTION D-D' COR-0090
128