Hyundai TIBURON Manual page 107

BODY PANEL REPAIR PROCEDURE - Front and rear door outer panels
R E M O V A L
1. Cut door outer panel hem with a sander.
2. After grinding off the hemming location, remove the outer panel.
3. Dress rusty part with a sander and prepare surface to be
hemmed.
I N S T A L L A T I O N
1. Apply adhesive or equivalent to outer panel hem.
2. Apply mastic sealer or equivalent to the door upper member and
door reinforcement beam as shown in the figure.
W ' J
Uttg
Y@x
^jo^^^~^~
<£ ;)Vv
=^-jo)_rs[ - i n z r ? a S |
^ ^ M E §
n
=jD
PRO-1800
110