Hyundai TIBURON Manual page 74

BODY PANEL REPAIR PROCEDURE - Fender apron and front side member (Assembly)
5. MIG plug weld all holes
6. Clean MIG welds with a disc grinder.
NOTE
1. Be careful not to grind welded portions too much.
2. The internal parts will be stronger if the weld traces are
not ground.
7. Before welding the cowl side upper outer panel, apply the two
part epoxy primer and anti-corrosion agent to the interior of the
fender apron panel.
vC_o, * — -
J - J
H = "
" " " " " C - - ^ ^ I ^ ^ ^ ^ ^ " ^ X ^
iPJ^^^hi^^N*^
\ v v x / 1 r
PRO-0220
77