Hyundai TIBURON Manual page 73

BODY PANEL REPAIR PROCEDURE - Fender apron and front side member (Assembly)
8. Using a hammer and dolly, correct any flanges that become bent
or deformed when spotwelds are broken.
INSTALLATION
1.
2.
Drill 8 mm holes in the new fender apron and front side member
for MIG plug welding.
Remove paint from both sides of all portions that are to be welded
such as peripheries of MIG plug weld holes.
PRO-0200
3. Temporarily install new parts in place.
4. Measure each measurement point (Refer to the BODY DIMEN
SIONS) and corrcet the installation position.
PRO-0210
76