BODY PANEL REPAIR PROCEDURE - Quarter panel
6.
7.
8.
9.
10.
11.
Apply body filler to the welded seam. Sand and finish.
Apply the two-part epoxy primer to the interior of the quarter
outer panel.
Apply an anti-corrosion agent to the welded parts and interior of
the quarter outer panel (Refer to the CORROSION PROTEC-
TION).
Prepare exterior surfaces for priming, using wax and grease
remover.
Apply metal conditioner and water rinse.
Apply conversion coating and water rinse.
Apply the two-part epoxy primer.
12. Apply the correct seam sealers to all joints.
13. Reprime over the seam sealer to complete the repair.
14. In order to improve corrosion resistance, if necessary, apply an
under body anti-corrosion agent to the wheel well (Refer to the
CORROSION PROTECTION).
99