Hyundai TIBURON Manual page 105

BODY PANEL REPAIR PROCEDURE - Rear side member (Partial)
6. Apply an anti-corrosion to the interior of the rear side member
(Refer to the CORROSION PROTECTION).
7. Prepare exterior surfaces for priming, using wax and grease
remover.
8. Apply metal conditioner and water rinse.
9. Apply conversion coating and water rinse.
10. Apply the two-part epoxy primer.
11. Apply the correct seam sealer to ail joints (Refer to the BODY
SEALING LOCATIONS).
12. Reprime over the seam sealer to complete the repair.
13.
14.
After completing body repairs, carefully apply under coating to
the under body (Refer to the CORROSION PROTECTION).
In order to improve corrosion resistance, if necessary, apply an
under body anti-corrosion agent to the panel which is repaired
or replaced (Refer to the CORROSION PROTECTION).
108