Hyundai TIBURON Manual page 71

BODY PANEL REPAIR PROCEDURE - Fender apron and front side member (Assembly)
NOTE
Before repairing, remove Engine and Suspension Components.
Refer to the body dimension charts and measure the vehicle to
determine straightening and alignment requirements. The body
must be returned to its original dimension before you begin the
repair procedure.
REMOVAL
1. Drill out ail the spotwelds to separate radiator support panel from
front side member.
NOTE
When spotwelded portions are not apparent, remove paint
with a rotary wire brush.
k*of^&rt[ J J
• \^MI?~ „ — — - "
— "31 »
r^S
PRO-0110
2. Remove the radiator support panel.
3. Drill out all the spotwelds attaching the cowl side upper outer
panel.
NOTE
If it is possible that the cowl side upper outer panel is
reusable, be careful not to damage it while removing.
74