Hyundai TIBURON Manual page 83

BODY PANEL REPAIR PROCEDURE - Front pillar
10. Cut the side sill outer front reinforcement as illustration.
11. Cut the front side sill outer panel vertical cutiine and remove the
front pillar.
12. Straighten all flanges as necessary, prepare all surfaces to be
welded.
""^-^£5^^^.,
""o*]j. '•jj-^^*"^
/^T\__
feffl
—f A\ lin) °
mm
T^XldS'^^
pu
¥""'
PRO-0580
INSTALLATION
1. Transcribe the cutiine to the new front inner upper pillar, cut to
length and chamfer butt end to improve weld surface.
2. Transcribe the cutiine to the new front side sill outer panel and
new front pillar, adding 30mm overlap to end and cut to length.
3. Drill 8mm holes along outer panel flanges in production location
for attachment to other panels.
V » «, J V " " " " "
PRO-0600
86