Hydraulic Hoses - Toro Groundsmaster 1200 Service Manual

Hydraulic Hoses

g251725
1. Cylinder assembly (2 each)
2. Straight fitting
3. Orifice straight fitting
4. Hydraulic hose (2 each)
5. Tee fitting (2 each)
6. Cylinder assembly (2 each)
Hydraulic System: Service and Repairs
7. Hose assembly (2 each)
8. Flat head nut
9. Tube assembly
10. Flat head screw (2 each)
11. Manifold
12. Elbow fitting
The entire hydraulic hose assemblies must be secure properly. Repair or replace
the hydraulic components as necessary.
After assembly, check the hydraulic hoses and cylinder assemblies for proper
operation.
Note: Torque tighten the straight fittings and elbow fitting to 27.1 to 35.2 N·m (20
to 26 ft-lb).
Figure 30
13.
14.
15.
16.
17.
18.
Page 4–14 Groundsmaster® 1200 Pull-Behind Rotary Mower
Tube assembly
Tube clamp
Flat head screw
Hydraulic hose (2 each)
Hydraulic hose (2 each)
Quick connect coupler (2 each)
18235SL Rev A