Toro Groundsmaster 1200 Service Manual page 35

Assembling the Wheel Bearings (continued)
Groundsmaster® 1200 Pull-Behind Rotary Mower
18235SL Rev A
5. Rotate the wheel hub and tighten the slotted nut (7) to a final torque of 1.7
to 2.3 N·m (15 to 20 in-lb). After you torque the nut, ensure that the wheel
hub (5) does not wobble as it turns.
6. Tighten the nut until the next-possible cotter pin hole in the nut is aligned.
Install the cotter pin (10) to secure the slotted nut.
7. Install the dust cap (8).
8. Install the wheel; refer to
9. Remove the jack stands or blocks and lower the machine to the ground.
Installing the Wheel (page
Page 3–7
3–4).
Chassis: Service and Repairs