Removing the Impact Arm Assembly (continued)
Chassis: Service and Repairs
g254260
1.
Impact arm assembly
2.
Bolt
3.
Spindle spacer (2 each)
4.
Lock nut
5.
Nut
2. Remove the nut (item 4 in
secures the impact arm assembly (1) to cutting unit assembly (14).
3. Remove the bolt (item 11 in
that secures the rod end of the impact arm to the cutting unit frame.
4. Remove the bolt (22) and the lift arm pin assembly (21) from the machine
and remove the pivot hub (18).
Figure 18
6.
Hardened washer
7.
Thrust washer
8.
Nut (2 each)
9.
Bolt (2 each)
10.
Lift arm assembly
Figure
18), spacers (3) and the bolt (2) that
Figure
17), lock nut (13) and flat washers (12)
Page 3–22
Groundsmaster® 1200 Pull-Behind Rotary Mower
11.
Deck mount assembly
12.
Nut (4 each)
13.
Carriage bolt (4 each)
14.
Cutting unit
18235SL Rev A