Toro Groundsmaster 1200 Service Manual page 32

Removing the Wheel (continued)
Installing the Wheel
Chassis: Service and Repairs
Before lifting the machine with a jack, review and follow the Jacking
Instructions from the Groundsmaster 1200 Operator's Manual.
5. Jack the machine up until the wheel is off the ground. Support the machine
with appropriate jack stands.
6. Remove the 5 wheel-lug nuts (2) and remove the wheel.
1. Install the wheel (1) to the wheel hub assembly (3).
2. Install the 5 lug nuts until they are snug.
3. Lower the machine to the ground.
Failure to maintain proper torque could result in failure or loss of
wheel and may result in personal injury.
Torque the wheel-lug nuts properly.
4. Torque the wheel-lug nuts (2) to 75 to 101 N∙m (55 to 75 ft-lb) in a star
pattern.
5. Check and adjust the tire pressures; refer to
IMPORTANT
WARNING
Page 3–4 Groundsmaster® 1200 Pull-Behind Rotary Mower
Chassis (page 2–4).
18235SL Rev A