Toro Groundsmaster 1200 Service Manual page 101

Assembling the Blade Spindle (continued)
Installing the Blade Spindle
g241345
1. Left spindle grease fitting
2. Right spindle grease fitting
Groundsmaster® 1200 Pull-Behind Rotary Mower
18235SL Rev A
A pneumatic grease gun can produce high pressure inside the
spindle housing that can damage the spindle seals. Thus, do not use
a pneumatic grease gun for greasing of the spindle housings.
12. Attach a hand pump grease gun to the grease fitting on the housing and fill
the housing cavity with grease until the grease starts to come out of the
lower seal.
13. Rotate the spindle shaft to ensure that it turns freely.
1. Position the spindle on the cutting unit and note the orientation of the grease
fitting; refer to Figure
IMPORTANT
Figure 54
3. Center spindle grease fitting
54.
Page 6–17 Cutting Units: Service and Repairs