Latch Linkage Assembly - Toro Groundsmaster 1200 Service Manual

Latch Linkage Assembly

g243402
1. Latch spacer
2. Wing latch
3. Latch spacer
4. Rod end (left-hand thread)
5. Bolt
Groundsmaster® 1200 Pull-Behind Rotary Mower
18235SL Rev A
Side Cutting Unit Assembly (shown)
6. Hex nut (left or right-hand thread)
(2 each)
7. Quadrant linkage rod
8. Flat head nut
9. Lock washer (2 each)
10. Latch shaft assembly
The entire latch linkage assembly must be secure and move freely. Repair or
replace the latch linkage assembly components as necessary.
Adjust the quadrant linkage rod so that the clevis spring pin is centered in the
slot of the wing latch.
Figure 20
11.
12.
13.
14.
Page 3–25
Wing latch pin assembly
Washer head bolt
Yoke linkage
Clevis spring pin
Chassis: Service and Repairs