Check Harness And Connector (Transmission Wire − Ecm) - Toyota Tundra 2005 Service - Repair - Maintenance

DI−1066
2 Check harness and connector (Transmission wire − ECM)
ECM:
E7 E6 E5
S2
OK
Replace the ECM (See page SF−66).
DIAGNOSTICS
PREPARATION:
E4 E3
(a)
(b)
CHECK:
Measure the resistance according to the value(s) in the table
below.
OK:
D14166
− AUTOMATIC TRANSMISSION (A750E for 1GR−FE)
Connect the transmission wire connector.
Disconnect the ECM connector.
Tester Connection
E6 − 10 (S2) − Body ground
NG Repair or replace the harness or connector
(See page IN−30).
Specified Condition
20_C (68_F)
11 to 15 Ω