Inspect Speed Sensor Installation; Inspect Speed Sensor Nt - Toyota Tundra 2005 Service - Repair - Maintenance

1

Inspect speed sensor installation.

5.4 N·m
(55 kgf·cm, 48 in.·lbf)
No Clearance
OK
OK
2

Inspect speed sensor NT.

Sensor Side:
(Connector Front View):
O1
2
OK
DIAGNOSTICS
PREPARATION:
Jack up the vehicle.
CHECK:
Check the speed sensor (NT) installation.
OK:
NG
D14164
NG
PREPARATION:
Disconnect the speed sensor connector from the transmission.
CHECK:
Measure the resistance according to the value(s) in the table
below.
OK:
1
D14165
NG
− AUTOMATIC TRANSMISSION (A750E for 1GR−FE)
The installation bolt is tightened properly and there is
no clearance between the sensor and transmission
case.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
Replace speed sensor NT (See page AT−8).
Tester Connection
1 − 2
Replace speed sensor NT (See page AT−8).
DI−1011
Specified Condition
20 _C (68 _F)
560 to 680 Ω