Power Supply Connector (6Es5 762-2Cs11) - Siemens SIMATIC ET 200C Manual

ET 200C Components
3.9

Power Supply Connector (6ES5 762-2CS11)

Application
The power supply connector is used to combine the SINEC L2-DP field bus
and the external power supply.
Characteristics The power supply connector has the following characteristics:
Connections The power supply connector has the following connections:
Figure 3-10
3-18
Degree of protection IP 66/IP 67 (see Installation rules, Section 4.1);
Choice of following baud rates:
9.6; 19.2; 93.75; 187.5; 500; 1500; 3000; 6000 or 12000 kbaud
Baud rates 3000, 6000 and 12000 kbaud are possible only for operation
with the IM 308-C and the digital modules (see Section 1.2).
Loadable with a maximum of 4 A input current. This limits the number of
digital input modules that can be connected (see Section 2.1.3).
Does not represent a bus node with station number
Attachment without opening the cover (drill-hole template at the back of
the manual).
Connection for "Incoming" SINEC L2-DP field bus
(12-pin socket)
Connection for "Incoming" external power supply
(6-pin male connector)
Connection for "Outgoing" SINEC L2-DP field bus with power supply
(12-pin socket)
Grounding screw for connection of PE
Power Supply Connector
ET 200C Distributed I/O Station
EWA 4NEB 812 6119-02b