4.3.10 Wiring Of The External Power Supply To The Ps Connector; Pin Assignment Of The External Power Supply - Siemens SIMATIC ET 200C Manual

Mechanical and Electrical Installation

4.3.10 Wiring of the External Power Supply to the PS Connector

Introduction
An external power supply must be connected to the power supply connector.
Connecting
To connect the external power supply you will require
External Power
Supply
Connect the circular socket in accordance with the following pin assignment:
Table 4-18 Pin Assignment of the External Power Supply
Sealing of Unused
Connections which are not required must be sealed using the enclosed metal
Connections caps.
4-42
6-pin circular socket
and
Flexible 3-core Cu cables:
– with a minimum core cross-section of 0.75 mm
diameter of 6 to 10 mm.
Pin
1
2
3
4
5
6
2
(AWG 18) and a
Power supply
PE
P 24 V
M 24 V
free
free
free
ET 200C Distributed I/O Station
EWA 4NEB 812 6119-02b