Digital Input Module Et 200C; Di 8 Dc 24V (6Es7 141-0Bf00-0Xb0) - Siemens SIMATIC ET 200C Manual

ET 200C Components
3.1 Digital Input Module ET 200C; DI 8
(6ES7 141-0BF00-0XB0)
Characteristics
The digital input module ET 200C; DI 8
acteristics:
3-2
Degree of protection IP 66/IP 67 (see Installation rules, Section 4.1)
Choice of six different baud rates:
9.6; 19.2; 93.75; 187.5; 500; 1500; 3000; 6000 or 12000 kbaud
The baud rates 3000, 6000 and 12000 kbaud are only possible when the
module is operated with the IM 308-C (see Section 1.2).
Channel-by-channel diagnostics of the inputs for wire breaks and
short-circuit/overload of the sensor supply (can be switched off with
COM ET 200, see Section 5.1.4).
The diagnostics can be output via the IM 308-B master interface module.
In addition, each diagnostic message causes the LED "DIA" or the
respective individual diagnostics LED to light up.
LEDs for
– RUN
– BF (bus fault)
– DIA (diagnostics of the module)
– Status of the inputs or individual diagnostics
Attachment of the module without opening the cover (drill-hole template
at the back of the manual)
DC 24V
DC 24V has the following char-
ET 200C Distributed I/O Station
EWA 4NEB 812 6119-02b