Permissible Current Load For Load Voltage Supply - Siemens SIMATIC ET 200C Manual

ET 200C Configuration Options
Configuration with Power Supply Connector without T Connector,
Continued
Rules for the
The maximum permissible current for the external load voltage supply is
External Load limited:
Voltage Supply
Table 2-2
ET 200C;
DO 8
ET 200C;
DO 8
ET 200C;
DI 16/DO 16
(outputs in groups of 4)
Note
An external load voltage supply can only be looped via the digital output
module DO 8
The maximum current load of 4 A is not protected by means of a fuse in the
module.
2-6

Permissible Current Load for Load Voltage Supply

Digital module
max. 4 A
DC 24V/0.5A
Ambient temperature:
DC 24V/2A –25 ... +25 C
+26 ... +40 C
+41 ... +60 C
Ambient temperature:
DC 24V/2A –25 ... +25 C
+26 ... +40 C
+41 ... +60 C
DC 24V/0.5A until the maximum current of 4 A is reached.
Total permissible current load
max. 10 A
max. 8 A
max. 4 A
max. 3.5 A per group of 4
max. 2.5 A per group of 4
max. 1.5 A per group of 4
ET 200C Distributed I/O Station
EWA 4NEB 812 6119-02b