Technical Data - WAGO 750 Series Manual

3.1.9 Technical Data

System data
Number of nodes
Transmission medium
Buscoupler connection
Max. length of fieldbus segment
Baud rate
Protocols
Technical Data
No. of I/O modules
with bus extension
Fieldbus
Configuration
Max. no. of socket connections
Voltage supply
Input currentmax
Efficiency of the power supply
Internal current consumption
Total current for I/O modules
Isolation
Voltage via power jumper contacts
Current via power jumper
contactsmax
Dimensions (mm) W x H x L
Weight
Accessories
Miniature WSB quick marking system
Standards and Regulations (cf. Chapter 2.2)
EMC CE-Immunity to interference
EMC CE-Emission of interference
EMC marine applications-Immunity to
interference
EMC marine applications-Emission of
interference
Approvals (cf. Chapter 2.2)
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
Input process image max.
Output process image max.
Fieldbus coupler 750-342 • 67
limited by ETHERNET specification
Twisted Pair S-UTP 100 Ω cat. 5
RJ45
100 m between hub station and 750-342;
max. length of network limited by ETHERNET
specification
10 Mbit/s
MODBUS/TCP, MODBUS/UDP, HTTP, BootP
64
250
max. 512 Byte
max. 512 Byte
via PC
1 HTTP, 5 MODBUS/TCP
DC 24 V (-25 % ... + 30 %)
500 mA at 24 V
87 %
200 mA at 5 V
1800 mA at 5 V
500 V system/supply
DC 24 V (-25 % ... + 30 %)
DC 10 A
51 x 65* x 100 (*from upper edge of DIN 35 rail)
ca. 195 g
acc. to EN 50082-2 (96)
acc. to EN 50081-1 (93)
acc. to Germanischer Lloyd (1997)
acc. to Germanischer Lloyd (1997)
Technical Data