Reading Out The Information As Html - WAGO 750 Series Manual

3.1.6.6 Reading out the information as HTML pages
The information saved in the fieldbus coupler can be read as an HTML page
using a web browser.
•
Information on the fieldbus node (Terminal Status):
-
-
•
Information on the fieldbus coupler (Coupler and Network Details):
-
-
-
-
-
-
-
•
Diagnostic information on the fieldbus coupler (Coupler Status):
-
-
-
Fig. 3-14: Reading out the information via the HTTP protocol
Please proceed as follows:
1. Open a web browser such as Microsoft Internet-Explorer, Netscape
2. Simply enter the IP address of your fieldbus node in the address field of the
Attention
If the pages are not displayed after local access to the fieldbus node, then
define in your web browser that, as an exception, no proxyserver is to be used
for the IP address of the node.
WAGO-I/O-SYSTEM 750
ETHERNET TCP/IP
Number of digital, analog or complex modules
Representation of the process image
Order number
Firmware version
MAC-ID
IP address
Gateway address (if applicable)
Subnet mask
Number of transmitted and received packets
Error code
Error argument
Error description
Navigator, ...
browser and press the Return key.
The first HTML page with the information on your fieldbus coupler will be
displayed in the browser window. Use the hyperlinks to find out more
information.
Fieldbus coupler 750-342 • 57
Starting up a Fieldbus Node
G012916d