Purpose Of The User Guide; Intended Audience; Conventions Used In This Document; Notes - Distech Controls ECL-PTU-207 User Manual

Introduction to the Preloaded Applications

Purpose of the User Guide

This user guide is intended to provide information and instruct a user to configure an ECL-PTU con-
troller from its preloaded applications using either EC- gfx Program or an Allure EC-Smart-Vue sensor.
However, this guide is not designed to instruct the user on how to use an ECL-PTU controller. For in-
formation on this controller series, refer to its datasheet and to the EC- gfx Program user guide, both of
which are available on the Distech Controls website.
This user guide only explains hardware installation in a general sense. Please refer to the individual device's
installation guides for specific hardware installation information.
This user guide does not provide and does not intend to provide instructions for safe wiring practices. It is the
user's responsibility to adhere to the safety codes, safe wiring guidelines and safe working practices of the local
area. This user guide does not intend to provide all the information and knowledge of an experienced HVAC
technician or engineer.

Intended Audience

This user guide is intended for system designers, integrators, and field technicians who have experi-
ence with control systems. It is recommended that anyone installing and configuring the devices speci-
fied in this user guide have prior training in the usage of these devices.

Conventions Used in this Document

Notes

This is an example of Note text. Wherever the note-paper icon appears, it means the associated text is giving a
time-saving tip or a reference to associated information of interest.

Cautions and Warnings

This is an example of Caution and Warning text. Wherever the exclamation icon appears, it means that there
may be an important safety concern or that an action taken may have a drastic effect on the device, equipment,
and/or network if it is done improperly.

Conventions for using the mouse

8
Click the item.
Click, drag, and release the item.
ECL-PTU-207 Preloaded Applications