Assembly Options - SawStop RT-TGI Owner's Manual

ASSEMBLY OPTIONS

The 30" x 16" Cast Iron Router Table with 32" Fence Assembly can be mounted to your
SawStop Industrial Cabinet Saw (ICS) with T-Glide Fence System-Industrial Series II
(TGI2) rails in any of three different configurations depending on your needs.
i
The between-rail installation of the 30" x 16" router table is only compatible with T-Glide Fence System
– Industrial Series II (TGI 2) rails. If you wish to use the T-Glide Fence System – Industrial Series (CBFR)
rails, you will have to modify them significantly.
In-Line Left of
This configuration increases the available table space of your SawStop table saw and
provides the maximum ripping capacity to the left of the saw blade.
Required Components:
• 30" x 16" Cast Iron Router Table (RT-C30)
• Power Switch (RT-PSW)
• Support Legs (RT-ST2)
Compatible With:
• T-Glide Fence System – Industrial Series I or II (CBFR or TGI2) rails
1
RT-TGI OWNER'S MANUAL
Left Wing
Option 1 of 3
PAGES:
1-3