In-Line Installation Left Of Left Wing - SawStop RT-TGI Owner's Manual

In-Line Installation Left of Left Wing

Requires:
"Wing Mounting Hardware" Bag from Power Switch (RT-PSW) Box
"Rail Mounting Hardware" Bag from Power Switch (RT-PSW) Box
30" x 16" Cast Iron Router Table with Support Legs Attached
Straight Edge
13mm Wrench (x2)
THIS PROCEDURE REQUIRES TWO PEOPLE. THE CAST IRON TABLE IS HEAVY
AND CAN CAUSE SERIOUS PERSONAL INJURY OR DAMAGE IF DROPPED.
i
The hardware for this procedure can be found in the "Wing Mounting Hardware" bag included
in your Power Switch box. You will not use all the hardware from the bag.
Align the upper three mounting holes in
1
the router table with the three holes in
the left extension wing of your Industrial
Cabinet Saw.
RT-TGI OWNER'S MANUAL
20