SawStop RT-TGI Owner's Manual page 15

i
Important Part Identification Note:
Throughout the manual, the exploded views are referenced to clarify the location and
name of each part. There are multiple exploded views in this manual, so a
decimal point system is used. The number before the decimal point refers to the
exploded view number (in this case, 1 through 4). The number after the decimal point
refers to the part number (as indicated by the number in the balloon in the exploded
view). For example, a part referenced as "1.1" would be the part labeled with a "1"
balloon in the exploded view #1.
•
Exploded View #1: 30" x 16" Cast Iron Router Table – See page 39
•
Exploded View #2: Support Legs for In-Line Router Tables – See page 41
•
Exploded View #3: Power Switch for In-Line Router Tables – See page 43
•
Exploded View #4: 32" Fence Assembly for Router Tables – See page 45
RT-TGI OWNER'S MANUAL
10