Parts Inventory; Cast Iron Table Parts And Hardware - SawStop RT-TGI Owner's Manual

PARTS INVENTORY

Please unpack the parts carefully and confirm you have received each item on
the list below.
IF YOU CANNOT FIND AN ITEM ON THIS LIST, CHECK THE MOUNTING
LOCATIONS OR EXAMINE THE PACKAGING MATERIALS VERY CAREFULLY.
CERTAIN COMPONENTS MAY HAVE BEEN PRE-INSTALLED FOR
SHIPPING PURPOSES.
30" x 16" Cast Iron Router Table (RT-C30)
A.
30" x 16" Cast Iron Router Table (1)
B.
M6 x 1.0 Hex Nut (10)
C.
M6 x 1.0 x 40 Flat Head Phillips Screw (10)
D.
Mobile Base Cabinet Hold-Down Kit for Router Tables (1)
C
You will also need the following tools:
•
Phillips Head Screwdriver
See Exploded View #1 on page 39 for more information.
A
B
D
RT-TGI OWNER'S MANUAL
PAGES:
6-10
6