SawStop RT-TGI Owner's Manual page 43

9. Do not operate your router, use the ICS In-Line Router Table Assembly, or any
other tools under the influence of alcohol or drugs.
10. Wear proper apparel when using the ICS In-Line Router Table Assembly. Do not
wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may
get caught in moving parts. Non-slip footwear is recommended. Wear a protective
hair covering to contain long hair.
11. Always wear approved safety glasses and/or a face shield when using the ICS In-
Line Router Table Assembly. Also use a face or dust mask if the cutting operation
is dusty. Everyday eyeglasses are not safety glasses.
12. Keep hands away from router bits and use fixture when necessary. Never reach
around or over the router. Use feather boards and/or push sticks to keep your
hands away from the router bit. Keep proper footing and balance at all times.
13. Always run your workpiece against the rotation direction of the router bit. Never
cut pieces between the fence and the router bit.
14. Always ensure the router bit is in good working condition before use. Examine the
router bit prior to use and replace the bit if it is damaged.
15. Ensure the ICS In-Line Router Table Assembly, and your router are installed
securely before use.
16. Maintain the ICS In-Line Router Table Assembly as specified in this manual. Use
only identical replacement parts when servicing the In-Line Router Table.
17. Turn the power disconnect switch to OFF and unplug your router before servicing,
making any adjustments, or cleaning the ICS In-Line Router Table Assembly.
Always ensure the power is OFF before changing components or accessories such
as router bits, guards, and the like.
18. Check to make sure the ICS In-Line Router Table Assembly is in working order
before use. For example, check the alignment of moving parts, look to see
whether moving parts are binding or rubbing, check to see whether parts are
broken, make sure accessories are properly installed, and check any other
conditions that may affect the operation of the ICS In-Line Router Table Assembly.
Any parts that are damaged should be properly repaired or replaced.
RT-TGI OWNER'S MANUAL
38