Diagnosis - Siemens Sicam P855 7KG85 Series Device Manual

7.5.6

Diagnosis

7.5.6.1 Diagnosis Modbus
NOTE
The data for diagnosing Modbus TCP and/or Modbus RTU are only displayed if you have selected these bus
protocols on the Configure tab  Administrative menu  Ethernet communication and Communication
serial menu items.
For protocols that are not selected, the Diagnosis Modbus input/output window shows the entry -none-.
✧ In the navigation window, select the Diagnosis menu and click Modbus.
The Modbus input/output window opens and the Modbus TCP and Modbus RTU protocols are
displayed. For Modbus TCP the Standard server and the User-port server are analyzed, for Modbus
RTU the Serial interface and the Serial server are analyzed.
Figure 7-79
SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
Maintenance Tab, Diagnosis Modbus Input/Output Window with Protocols Modbus TCP and
Modbus RTU
7 Operation at Use of a PC
7.5 Maintenance
201