Alarm, Error, And System Messages; Introduction; Diagnosis Response - Siemens SITRANS F Series Function Manual

Communication

2.12 Alarm, error, and system messages

2.12 Alarm, error, and system messages
2.12.1

Introduction

The PROFIBUS slave has the capability of sending diagnostic data. The diagnostic data is
hierarchically organized.
● Device status
● General faults ans conditions
● Alarm status (1 to 10)
2.12.2

Diagnosis Response

A PROFIBUS master is able to request diagnosis information from the slave using the
diagnosis service. The following table shows the content of the diagnosis response sent from
the device upon a request from the master.
Table 2-21
Byte
10...13
NE107 diagnostic
64
Diagnosis Response
Element Name
Device status
Description
Device status
Restart
Application reset
Maintenance required
Maintenance alarm
Maintenance demanded
Function check
Out of specification
Parameter update
Extension available
FCT030 Profibus (From firmware 4.0)
Function Manual, 06/2018, A5E39931906-AB