Siemens Sicam P855 7KG85 Series Device Manual page 178

7 Operation at Use of a PC
7.4 Value View and Evaluation
7.4.2.1 Events (Only SICAM P855)
Default Settings and Setting Options
Table 7-25 Value View and Evaluation - Events
Parameter
Event record type
Start time
End Time
Measurement output
To display the values on the screen, proceed as follows:
✧
In the navigation window, select the Evaluation and Data Management menu and click Events.
The Events input/output window opens.
Figure 7-58
✧ Select the desired Event record type in the list box according to Table 7-25 and specify the Start time
and End time using the calendar function.
✧
Select from the Measurement output list box whether the measured values are to be output as a Table
or a CSV file is to be created.
178
Default Setting
Supply Voltage
Current date/time
Current date/time
Table
Value View Tab and Evaluation, Events Input/Output Window, Supply Voltage
Setting Options
Supply Voltage
Frequency
Unbalance
Any with calendar function
Time format: depends on date/time format config.
Any with calendar function
Time format: depends on date/time format config.
Table
CSV
SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018