Siemens Sicam P855 7KG85 Series Device Manual page 127

To change the outputs of a binary output, proceed as follows:
✧
In the navigation window, select the Operational menu, then the Process connections submenu and
click Binary outputs.
Figure 7-26
NOTE
The parameterization of both binary outputs is identical. Figure 7-26 depicts binary output Terminal G1/3 as
output for indications and binary output Terminal G1/2 as energy counter.
You can only set either an indication or an energy counter for a binary output.
SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
Configure Tab, Binary Outputs Input/Output Window
7 Operation at Use of a PC
7.3 Configuration of the Device
127