Safety Standards; Cautions Regarding Compliance With Ec Directives; Ce Marking - Omron SCARA YRC Series Supporting Supplement Manual

1.

CE Marking

This section provides a basic description of how the YRC series comply with CE marking.
Differences in the basic specifications between CE marking compliant controllers and standard controllers are as
follows:
Main specifications of CE Marking compliant controller
■
Service mode
Programming box
2.

Safety standards

2.1

Cautions regarding compliance with EC Directives

The OMRON robot (robot and controller) is not, in itself, a robot system. The OMRON robot is just one component
that is incorporated into the customer's system (built-in equipment), and we declare that OMRON robots conform to the
EC Directives only within the scope of built-in equipment. This does not therefore guarantee that OMRON robots
conform to EC Directives in cases where the robot is used independently. Customers who incorporate a OMRON robot
into their final system which will be shipped to, or used, in the EU, should therefore verify that the overall system is
compliant with EC Directives.
● Differences between OMRON robots (robot and controller) and robot systems
A OMRON robot (robot and controller) is just one component in a robot system, and is not, in itself, a robot
system.
This is because a OMRON robot does not include the "end effector(s)" or "any equipment, devices, or sensors
required for the robot to perform its tasks", as defined in "Industrial Robot system" of the ISO 10218-1: 2011
Standard - Clause 3.11.
CE Marking compliant controller
Provided
PB
(enable switch compatible specifications)
1
1-1