Table of Contents
Advertisement
5.2
Warning marks
The following warning marks are shown on the controller. To use the OMRON robot and controller safely and correctly,
be sure to observe the instructions and caution of the marks.
1.
"Electric Hazard" mark
This mark indicates that a high voltage is present.
This mark warns you of possible electrical shock. Do not touch the terminal block and connectors to avoid electrical shock.
2.
"CAUTION" mark
!
This label means that important information you must know is described in the manual.
Before using the controller, be sure to read this manual carefully.
When in particular configuring an external safety circuit or connecting a power supply to the controller, read this manual carefully
and follow the instructions.
Connectors have a particular orientation, so insert each connector in the correct direction.
3.
"High Temperature Hazard" mark
Indicates that the area around this mark may become very hot.
Heatsinks and regenerative unit become hot during and shortly after operation. Do not touch them to avoid burns.
6.
Industrial robot operating and maintenance personnel
Operators or persons who handle the robot such as for teaching, programming, movement check, inspection,
adjustment, and repair must receive appropriate training and also have the skills needed to perform the job correctly
and safely. They must read the user's manual carefully to understand its contents before attempting the robot operation.
Tasks related to industrial robots (teaching, programming, movement check, inspection, adjustment, repair, etc.) must
be performed by qualified persons who meet requirements established by local regulations and safety standards for
industrial robots.
7.
Make daily and periodic inspections
Always make sure that daily and periodic inspections are performed, and make a pre-work check to ensure there are
no problems with the robot or related equipment. If a problem or abnormality is found, then promptly repair it or take
other measures as necessary.
6
Advertisement
Table of Contents
