Address Setting For Modules; Cecx-D-14A-2 - Festo CECX-X-C1 Series Manual

Possible error states (when status = TRUE)
Module status: module is defective or missing.
DI status: no error message

CECX-D-14A-2

Module parameters
Name Value
Address Auto
0 - F
DO0..DO7: short None
circuit scan,
DO8..DO13: short
circuit scan
Scan
Digital output module

14 digital output modules 2A at 50%
coincidence, divided into 2 groups (6 and 8
outputs), short-circuit protected, overload
protection, short-circuit detection, group cut-off.
Description
The address set on the hex switch on the module is
recognized and taken over automatically. See chapter

"Address setting for modules".

The address set here (specified in hexcode) must be
brought into agreement with the position of the address
switch on the module.
This module has two output groups with separate
voltage supply. The short-circuit detection switches off
all active outputs of the output group in which the short
circuit occurred.
The short-circuit detection reactivates the outputs not
CECX modular control system
CECX-I 17