Diagnosis Display (Diagnostics); Compact Flash Card - Festo CECX-X-C1 Series Manual

6.4

Diagnosis display (Diagnostics)

A single-digit 7-segment display on the front side of the CPU module indi-
cates the start-up modes and operating states. For details, refer to chapter
Operational behavior.
Diagnosis display
6.5

Compact Flash Card

To operate the CECX modular control system a Compact Flash Card with
the respective firmware and the application must be plugged into the Com-
pact Flash slot. Depending on the application used the Compact Flash
Card can be used for storing machine data (e.g. mold data and recipes).
The Compact Flash Card cannot be used as removable medium since it al-
so has system programs stored on it. The Compact Flash Cards supported
by the CECX modular control system can be requested and ordered from
FESTO.
CAUTION
The Compact Flash Card can sustain damage if handled incorrectly!

Do not remove or plug in the memory card during operation.

Do not switch the unit off while it is writing on the memory card.

Do not use force when inserting the card into the slot.

Do not drop the card nor bend it.

Do not expose the memory card to humidity, heat and direct sunlight.

Keep the memory card away from electrostatic sources or magnetic
fields.
The slot is designed so that the Compact Flash Card can only be slotted in-
to the slot in the one direction. The card should slide easily into the slot.
The status LED next to the eject key lights up when the control accesses
the card for writing or reading.
CECX-II 6-2
System manual CECX / Operation and displays