2. Cabling and pin assignment
2.1
Description
2.2
Pin assignment and setting of the node address
Festo P.BE−SEC−AC−CO−EN en 0802a
The CAN bus interface possesses a CAN bus output (X306) as
well as a differential 12−bit analogue input with a 5 V auxiliary
output voltage (X303). By means of 5 DIP switches 16 differ
ent node addresses can be set or a 120 W terminating resis
tor can be switched in, as desired.
Fig. 2/2: Sketch of the module
2−3