Version 3.00 At Introduction - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

1
What's New

Version 3.00 at Introduction

The Keysight InfiniiVision 4000 X-Series oscilloscopes were introduced with
version 3.00 of oscilloscope operating software.
The command set is most closely related to the InfiniiVision 3000 X-Series
oscilloscopes (and the 7000A/B Series, 6000 Series, and 54620/54640 Series
oscilloscopes before them). For more information, see
From 3000 X-Series Oscilloscopes"
62
on page 63.
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
"Command Differences