T
ROUBLESHOOTING
For the appropriate name, see the following table.
In this location
Setup
Windows hosts file
Windows setup for
TCP/IP
UNIX /etc/printcap file
(BSD)
Solaris
Add New Server dialog box,
when configuring a utility
Cannot connect to the E-42B with utilities
If users cannot connect to the E-42B, check the following:
The appropriate network protocol must be enabled, with the correct parameters
E-42B Setup:
(for example, for TCP/IP, the IP address), and you must publish the Print queue or Hold
queue.
You can check these settings quickly by printing a Configuration page.
The appropriate network protocols must be loaded.
On the client computer:
For this item
TCP/IP networks
Server Name option
Administrator defines
name
host name
DNS name
(TCP/IP host name)
lpd host name
DNS name
(TCP/IP host name)
Name of printer on lpd
print, hold, or direct
host machine
rp line
print, hold, or direct
lpadmin queuename
print, hold, or direct
Server Name
DNS name
(TCP/IP host name)
71
See
page 27
page 16
page 16
page 17
Utilities
Need help?
Do you have a question about the Color Controller E-42B and is the answer not in the manual?